GEPRC GEP-12A-F4 AIO

Brand
Category: AIO
Kod: MS46891340

  • Power Input: 2-4S LiPo
  • Mounting: 25.5x25.5mm (M2)
  • Dimensions: 28.5x28.5mm
  • Weight: 5.6g
  • Continuous Current: 12A
  • Burst Current: Not specified by manufacturer

Details

The GEPRC GEP-12A-F4 AIO is an AIO board that combines the flight controller and a 4in1 ESC on one board. Flight controller: STM32F411 processor, BMI270 / ICM42688 (SPI) gyro, OSD: Betaflight OSD (AT7456E), BEC 5V@1A, buzzer, firmware target GEPRCF411. ESC: input 2-4S LiPo, 12A continuous, DShot600, Oneshot, Multishot, BLHeli_S (G_H_30), ESC MCU BB21F16G. Board size 28.5x28.5mm, mounting 25.5x25.5mm (M2), weight 5.6g. Designed for indoor micro drones and 1103-1105 motors. The manufacturer notes a new FC version has been used since January 1, 2023.

Box Contents

  • 1 x GEP-12A-F4, 1 x power cable, 8 x screws, 4 x soft silicone
1. Open Aio Manual in a New Tab
Click here to open the Aio Manual in a new tab
2. Download Aio Manual
Click here to download the Aio Manual
Aio: GEPRC GEP-12A-F4 AIO Manual Connection Image
Open the Manual in a New Tab Manual Connection Image
    Power Input (FC):
    2-4S LiPo
    Mounting (FC):
    25.5x25.5mm (M2)
    Dimension (FC):
    28.5x28.5mm
    Weight (FC):
    5.6g
    MCU (FC):
    STM32F411
    IMU(Gyro) (FC):
    BMI270 / ICM42688 (SPI)
    USB Connection (FC):
    Not specified by manufacturer
    Barometer (FC):
    No
    OSD (FC):
    Betaflight OSD (AT7456E)
    BLE Bluetooth (FC):
    Not specified by manufacturer
    Flash FC Firmware Wirelessly (FC):
    Not specified by manufacturer
    Download/Analyze Blackbox (FC) :
    Not specified by manufacturer
    DJI Air Unit 6-pin Connector (FC):
    Not specified by manufacturer
    Flash(for BlackBox) (FC):
    Not specified by manufacturer
    Current Sensor (FC):
    Yes (current meter scale 210)
    BetaFlight Camera Control Pad (FC):
    Not specified by manufacturer
    5V Output (FC):
    5V@1A
    9V Output (FC):
    Not specified by manufacturer
    ESC Signal Pads (FC):
    Not specified by manufacturer
    UART (FC):
    Not specified by manufacturer
    ESC Telemetry UART (FC):
    Not specified by manufacturer
    LED Pad (FC):
    Not specified by manufacturer
    Buzzer (FC):
    Yes (buzzer pad)
    BOOT Button (FC):
    Not specified by manufacturer
    Supported Flight Controller (FC):
    Betaflight
    Firmware Target Name (FC):
    GEPRCF411
    Power Input (ESC):
    2-4S LiPo
    Continuous Current (ESC):
    12A
    Burst Current (ESC):
    Not specified by manufacturer
    ESC Protocol (ESC):
    DShot600, Oneshot, Multishot
    Power Output (ESC):
    Not specified by manufacturer
    Current Sensor (ESC):
    Yes (current meter scale 210)
    Firmware (ESC):
    BLHeli_S (G_H_30), ESC MCU BB21F16G