Electronics Black Wrist Watch
Electronics Black Wrist Watch
Electronics Black Wrist Watch
Electronics Black Wrist Watch
Electronics Black Wrist Watch
Electronics Black Wrist Watch
Electronics Black Wrist Watch
Electronics Black Wrist Watch
Product Thumb
Product Thumb
Product Thumb
Product Thumb
Product Thumb
Product Thumb
Product Thumb
Product Thumb

HGLRC F722 40A 2-6S BL32 AIO V2

Brand
Category: AIO
Kod: MS46891340
(Review Pending)
  • Power Input: 2-6S LiPo (8.4-25.2V)
  • Mounting: 25.5x25.5mm (M2)
  • Dimensions: 34x34mm
  • Weight: 10.5g
  • Continuous Current: 40A x4
  • Burst Current: 60A (single channel) / 140A (four channels total)

Details

The HGLRC F722 40A V2 is a 2-6S AIO flight controller with an STM32F722 processor, ICM42688P gyro and a 32-bit BL32 ESC. Its UART pad layout has been rearranged for common drone builds, making assembly more logical and easier. A single universal VTX connector supports direct connection of both analog and digital VTX. It features a 16MB black box, OSD supporting analog and digital signals and a 5V 2A BEC. The ESCs come with BL32 (32.10) firmware, offering higher refresh rates and a more linear control feel. It delivers 40A continuous current per channel; according to the spec sheet, single-channel peak current is 60A and four-channel total peak current is 140A. It is suitable for 2-5 inch frames. Firmware: HGLRC_F722_S (version 2025.12). Weight is 10.5g; 50g in total including the package. Package contents: AIO, capacitor, XT60 connector, power cables and 4 connection cables.

Box Contents

1. Open Aio Manual in a New Tab
Click here to open the Aio Manual in a new tab
2. Download Aio Manual
Click here to download the Aio Manual
Aio: HGLRC F722 40A 2-6S BL32 AIO V2 Manual Connection Image
Open the Manual in a New Tab Manual Connection Image
    Power Input (FC):
    2-6S LiPo (8.4-25.2V)
    Mounting (FC):
    25.5x25.5mm, M2
    Dimension (FC):
    34x34mm
    Weight (FC):
    10.5g
    MCU (FC):
    STM32F722
    IMU(Gyro) (FC):
    ICM42688P
    USB Connection (FC):
    Type-C
    Barometer (FC):
    Not specified
    OSD (FC):
    Supported (analog and digital signal)
    BLE Bluetooth (FC):
    Not specified
    Flash FC Firmware Wirelessly (FC):
    Not specified
    Download/Analyze Blackbox (FC) :
    Yes (16MB black box)
    DJI Air Unit 6-pin Connector (FC):
    Yes (universal analog/digital VTX connector)
    Flash(for BlackBox) (FC):
    16MB
    Current Sensor (FC):
    Not specified
    BetaFlight Camera Control Pad (FC):
    Not specified
    5V Output (FC):
    5V 2A
    9V Output (FC):
    None
    ESC Signal Pads (FC):
    Not specified
    UART (FC):
    Not specified (UART1, 2, 4, 5 on wiring diagram)
    ESC Telemetry UART (FC):
    Not specified
    LED Pad (FC):
    Yes
    Buzzer (FC):
    Yes
    BOOT Button (FC):
    Not specified
    Supported Flight Controller (FC):
    Betaflight (HGLRC_F722_S target)
    Firmware Target Name (FC):
    HGLRC_F722_S (2025.12)
    Power Input (ESC):
    2-6S LiPo (8.4-25.2V)
    Continuous Current (ESC):
    40A x4
    Burst Current (ESC):
    60A (single channel) / 140A (four channels total)
    ESC Protocol (ESC):
    Not specified
    Power Output (ESC):
    Not specified
    Current Sensor (ESC):
    Not specified
    Firmware (ESC):
    ESC: BL32 32.10 (32-bit) / FC: HGLRC_F722_S 2025.12