HGLRC SPECTER 15A ELRS AIO 2-4S

Brand
Category: AIO
Kod: MS46891340

  • Power Input: 2-4S LiPo (7.4-14.8V)
  • Mounting: 25.5x25.5mm (M2)
  • Dimensions: 42.5x42.5mm
  • Weight: 6.9g
  • Continuous Current: 15A
  • Burst Current: 18A (10 seconds)

Details

The HGLRC SPECTER 15A is an F411-based 2-4S AIO brushless flight controller with a built-in serial port (UART) ExpressLRS 2.4G receiver. The UART-based built-in receiver offers more stable performance and signal than SPI receivers; the board has an IPEX antenna socket and comes with a T-type antenna (CRSF protocol). If needed, the built-in receiver's 5V pad can be disconnected to use an external receiver (TBS Crossfire Nano, HGLRC ELRS 900/2400, etc.); the R1 port is connected to the built-in ELRS receiver by default. It features an STM32F411 processor, MPU6000 gyro, 8MB black box, OSD, LED and buzzer support, and a 5V 2A BEC. Both a direct plug-in motor socket and extra-large motor pads are provided. The ESCs come with Bluejay (Q-H-50) firmware by default, delivering 15A continuous and 18A (10 s) burst current. It is compatible with 75mm/85mm whoop, 3-inch lightweight and toothpick frames. Package contents: AIO, 35V 220µF solid capacitor, XT30U-M 18AWG 70mm power cable, MX1.25-3P camera cable, 4x M2x6.6 shock-absorbing standoffs and HGLRC 2.4G T-type antenna.

Box Contents

1. Open Aio Manual in a New Tab
Click here to open the Aio Manual in a new tab
2. Download Aio Manual
Click here to download the Aio Manual
Aio: HGLRC SPECTER 15A ELRS AIO 2-4S Manual Connection Image
Open the Manual in a New Tab Manual Connection Image
    Power Input (FC):
    2-4S LiPo (7.4-14.8V)
    Mounting (FC):
    25.5x25.5mm, M2
    Dimension (FC):
    42.5x42.5mm
    Weight (FC):
    6.9g
    MCU (FC):
    STM32F411
    IMU(Gyro) (FC):
    MPU6000
    USB Connection (FC):
    Not specified
    Barometer (FC):
    Not specified
    OSD (FC):
    Supported
    BLE Bluetooth (FC):
    Not specified
    Flash FC Firmware Wirelessly (FC):
    Not specified
    Download/Analyze Blackbox (FC) :
    Yes (8MB black box)
    DJI Air Unit 6-pin Connector (FC):
    No (HD VTX connects via solder pads)
    Flash(for BlackBox) (FC):
    8MB
    Current Sensor (FC):
    Not specified
    BetaFlight Camera Control Pad (FC):
    Not specified
    5V Output (FC):
    5V 2A
    9V Output (FC):
    None
    ESC Signal Pads (FC):
    Not specified
    UART (FC):
    3 UARTs (R1 connected to built-in ELRS receiver by default)
    ESC Telemetry UART (FC):
    Not specified
    LED Pad (FC):
    Yes
    Buzzer (FC):
    Yes
    BOOT Button (FC):
    Not specified
    Supported Flight Controller (FC):
    Betaflight (ZEUSF4EVO target)
    Firmware Target Name (FC):
    ZEUSF4EVO
    Power Input (ESC):
    2-4S LiPo (7.4-14.8V)
    Continuous Current (ESC):
    15A
    Burst Current (ESC):
    18A (10 seconds)
    ESC Protocol (ESC):
    DShot300/600, Oneshot, MultiShot
    Power Output (ESC):
    Not specified
    Current Sensor (ESC):
    Not specified
    Firmware (ESC):
    ESC: Q-H-50 (Bluejay) / FC: ZEUSF4EVO