GEPRC GEP-F411-35A AIO

Brand
Category: AIO
Kod: MS46891340

  • Power Input: 2-6S LiPo
  • Mounting: 25.5x25.5mm
  • Dimensions: 32x32mm
  • Weight: 8.8g
  • Continuous Current: 35A
  • Burst Current: 40A (10 seconds)

Details

The GEPRC GEP-F411-35A AIO is an AIO board that combines the flight controller and a 4in1 ESC on one board. Flight controller: STM32F411 processor, ICM42688-P (SPI) (per spec table) gyro, 16Mb Blackbox, OSD: Betaflight OSD (AT7456E), USB: Micro USB, UART: T1 R1 / T2 R2, buzzer, LED, firmware target GEPRC_F411_AIO. ESC: input 2-6S LiPo, 35A continuous, 40A (10 seconds) burst, DShot300/600, Oneshot, Multishot, BLHeli_S (G_H_30), ESC MCU BB21F16G. Board size 32x32mm, mounting 25.5x25.5mm, weight 8.8g. Suitable for 1204/1404/1507/1805/2004 motors and 2-5 inch propellers. Note: the manufacturer's spec table lists the gyro as ICM42688-P, while the feature list and the June 14, 2022 changelog say BMI270. Mounting changed from 26.5x26.5mm to 25.5x25.5mm on June 25, 2022.

Box Contents

  • 1 x GEP-F4-35A AIO, 1 x XT30 7cm 18AWG cable, 1 x 35V 220uF capacitor, 8 x M2x6.5mm damping rings
1. Open Aio Manual in a New Tab
Click here to open the Aio Manual in a new tab
2. Download Aio Manual
Click here to download the Aio Manual
Aio: GEPRC GEP-F411-35A AIO Manual Connection Image
Open the Manual in a New Tab Manual Connection Image
    Power Input (FC):
    2-6S LiPo
    Mounting (FC):
    25.5x25.5mm
    Dimension (FC):
    32x32mm
    Weight (FC):
    8.8g
    MCU (FC):
    STM32F411
    IMU(Gyro) (FC):
    ICM42688-P (SPI) (per spec table)
    USB Connection (FC):
    Micro USB
    Barometer (FC):
    Not specified by manufacturer
    OSD (FC):
    Betaflight OSD (AT7456E)
    BLE Bluetooth (FC):
    Not specified by manufacturer
    Flash FC Firmware Wirelessly (FC):
    Not specified by manufacturer
    Download/Analyze Blackbox (FC) :
    Not specified by manufacturer
    DJI Air Unit 6-pin Connector (FC):
    Not specified by manufacturer
    Flash(for BlackBox) (FC):
    16Mb
    Current Sensor (FC):
    Yes
    BetaFlight Camera Control Pad (FC):
    Not specified by manufacturer
    5V Output (FC):
    Not specified by manufacturer
    9V Output (FC):
    Not specified by manufacturer
    ESC Signal Pads (FC):
    Not specified by manufacturer
    UART (FC):
    T1 R1 / T2 R2
    ESC Telemetry UART (FC):
    Not specified by manufacturer
    LED Pad (FC):
    Yes
    Buzzer (FC):
    Yes
    BOOT Button (FC):
    Not specified by manufacturer
    Supported Flight Controller (FC):
    Betaflight
    Firmware Target Name (FC):
    GEPRC_F411_AIO
    Power Input (ESC):
    2-6S LiPo
    Continuous Current (ESC):
    35A
    Burst Current (ESC):
    40A (10 seconds)
    ESC Protocol (ESC):
    DShot300/600, Oneshot, Multishot
    Power Output (ESC):
    Not specified by manufacturer
    Current Sensor (ESC):
    Yes
    Firmware (ESC):
    BLHeli_S (G_H_30), ESC MCU BB21F16G