Electronics Black Wrist Watch
Electronics Black Wrist Watch
Electronics Black Wrist Watch
Electronics Black Wrist Watch
Electronics Black Wrist Watch
Electronics Black Wrist Watch
Product Thumb
Product Thumb
Product Thumb
Product Thumb
Product Thumb
Product Thumb

FETtec Mini AIO 15A

Brand
Category: AIO
Kod: MS46891340
(Review Pending)
  • Power Input: 2S - 4S LiPo (6-18V)
  • Mounting: 27 x 25.5 mm
  • Dimensions: 29 x 29 mm
  • Weight: 3.41 g
  • Continuous Current: 15A x4
  • Burst Current: Not Specified

Details

The FETtec Mini AIO 15A is a compact AIO that combines KISS FC firmware, a 4-channel 15A ESC, and an integrated graphical OSD on a single board. The FC side uses an STM32F303CCT6 (72MHz) processor and MPU6000 gyro, while the ESC side uses a four-channel STM32G071 (64MHz) design with active current limiting. The mounting holes form a rectangular 27 x 25.5mm pattern rather than a square pattern. There is a single 5V/1A BEC shared between the receiver, camera, and VTX. All FC, ESC, and OSD firmware can be updated through the FETtec Configurator; at least KISS/FETtec firmware version 1.3RC45Y or newer is required. The package also includes a 35V 330µF capacitor. The product is currently shown as out of stock on the manufacturer’s own website.

Box Contents

1. Open Aio Manual in a New Tab
Click here to open the Aio Manual in a new tab
2. Download Aio Manual
Click here to download the Aio Manual
Aio: FETtec Mini AIO 15A Manual Connection Image
Open the Manual in a New Tab Manual Connection Image
    Power Input (FC):
    2S - 4S LiPo (6-18V)
    Mounting (FC):
    27 x 25.5 mm
    Dimension (FC):
    29 x 29 mm
    Weight (FC):
    3.41 g
    MCU (FC):
    STM32F303CCT6 (FC, 72MHz) + STM32G071 (ESC, 64MHz)
    IMU(Gyro) (FC):
    MPU6000
    USB Connection (FC):
    Micro-USB
    Barometer (FC):
    Not Specified
    OSD (FC):
    Yes
    BLE Bluetooth (FC):
    Not Specified
    Flash FC Firmware Wirelessly (FC):
    Not Specified
    Download/Analyze Blackbox (FC) :
    Not Specified
    DJI Air Unit 6-pin Connector (FC):
    Not Specified
    Flash(for BlackBox) (FC):
    Not Specified
    Current Sensor (FC):
    Not Specified
    BetaFlight Camera Control Pad (FC):
    Not Specified
    5V Output (FC):
    5V, 1A
    9V Output (FC):
    None
    ESC Signal Pads (FC):
    Not Specified
    UART (FC):
    3 UARTs (UART1, UART2, UART3)
    ESC Telemetry UART (FC):
    UART3
    LED Pad (FC):
    Yes
    Buzzer (FC):
    Not Specified
    BOOT Button (FC):
    Yes
    Supported Flight Controller (FC):
    KISS FC firmware
    Firmware Target Name (FC):
    Not Specified
    Power Input (ESC):
    2S - 4S LiPo
    Continuous Current (ESC):
    15A (per channel)
    Burst Current (ESC):
    Not Specified
    ESC Protocol (ESC):
    PWM, Oneshot42/125, DShot300-2400
    Power Output (ESC):
    Not Specified
    Current Sensor (ESC):
    Not Specified
    Firmware (ESC):
    KISS FC firmware (FC), FETtec ESC Firmware (ESC), FETtec OSD Firmware (OSD)