TUR
GEPRC GEP-F722-35A AIO
- Power Input: 2-6S LiPo
- Mounting: 25.5x25.5mm
- Dimensions: 32x32mm
- Weight: 8.8g
- Continuous Current: 35A
- Burst Current: 40A (10 seconds)
Details
The GEPRC GEP-F722-35A AIO is an AIO board that combines the flight controller and a 4in1 ESC on one board. Flight controller: STM32F722 processor, BMI270 / ICM42688 (SPI) gyro, 16Mb Blackbox, OSD: Betaflight OSD (AT7456E), USB: Micro USB, BEC 5V@1A, UART: 5 UART (R1 T1 / R2 T2 / R3 T3 / R4 T4 / R5 T5), 6-pin plug-and-play socket for HD/DJI digital VTX, buzzer, LED, firmware target GEPRC_F722_AIO. ESC: input 2-6S LiPo, 35A continuous, 40A (10 seconds) burst, DShot600, Oneshot, Multishot, BLHeli_S (G_H_30), ESC MCU BB21F16G. Board size 32x32mm, mounting 25.5x25.5mm, weight 8.8g. Manufacturer changelog: gyro updated to BMI270/42688 on June 14, 2022; mounting changed from 26.5x26.5mm to 25.5x25.5mm on June 25, 2022.
Box Contents
- 1 x GEP-F7-35A AIO, 1 x XT30 7cm 18AWG power cable, 1 x 35V 220uF capacitor, 1 x SH1.0 6-pin to GH1.25 8-pin cable, 8 x M2x6.5mm damping rings
1. Open Aio Manual in a New Tab
Click here to open the Aio Manual in a new tab2. Download Aio Manual
Click here to download the Aio Manual
Power Input (FC):
2-6S LiPo
Mounting (FC):
25.5x25.5mm
Dimension (FC):
32x32mm
Weight (FC):
8.8g
MCU (FC):
STM32F722
IMU(Gyro) (FC):
BMI270 / ICM42688 (SPI)
USB Connection (FC):
Micro USB
Barometer (FC):
Not specified by manufacturer
OSD (FC):
Betaflight OSD (AT7456E)
BLE Bluetooth (FC):
Not specified by manufacturer
Flash FC Firmware Wirelessly (FC):
Not specified by manufacturer
Download/Analyze Blackbox (FC) :
Not specified by manufacturer
DJI Air Unit 6-pin Connector (FC):
Yes (6-pin connector for DJI Air Unit, plug-and-play)
Flash(for BlackBox) (FC):
16Mb
Current Sensor (FC):
Yes
BetaFlight Camera Control Pad (FC):
Not specified by manufacturer
5V Output (FC):
5V@1A
9V Output (FC):
Not specified by manufacturer
ESC Signal Pads (FC):
Not specified by manufacturer
UART (FC):
5 UART (R1 T1 / R2 T2 / R3 T3 / R4 T4 / R5 T5)
ESC Telemetry UART (FC):
Not specified by manufacturer
LED Pad (FC):
Yes
Buzzer (FC):
Yes
BOOT Button (FC):
Not specified by manufacturer
Supported Flight Controller (FC):
Betaflight
Firmware Target Name (FC):
GEPRC_F722_AIO
Power Input (ESC):
2-6S LiPo
Continuous Current (ESC):
35A
Burst Current (ESC):
40A (10 seconds)
ESC Protocol (ESC):
DShot600, Oneshot, Multishot
Power Output (ESC):
Not specified by manufacturer
Current Sensor (ESC):
Yes
Firmware (ESC):
