TUR
SpeedyBee F745 35A BLS
25.5x25.5 AIO Flight Controller
- Power Input: 3-6S LiPo
- Mounting: 25.5 x 25.5 mm, 3 mm hole diameter
- Dimensions: 36.5 mm (H) x 36.5 mm (W) x 7 mm (D), recommended for 3.5 inch or larger quads
- Weight: 10.1g
- Continuous Current: 35A * 4
- Burst Current: 45A (5 seconds)
Details
Important Note: Ensure that the slightly larger size of the AIO fits your quad! This AIO has dimensions of 36.5(H)*36.5(W)*7.0(D)mm. We recommend using this AIO in your 3.5" to 5" cinewhoops/long-range or lightweight quads. For quads under 3.5", carefully check if your quad has enough space for this AIO.
Box Contents
- Available in visual
1. Open Aio Manual in a New Tab
Click here to open the Aio Manual in a new tab2. Download Aio Manual
Click here to download the Aio ManualAio: SpeedyBee F745 35A BLS <br>25.5x25.5 AIO Flight Controller Manual Connection Image
Open the Manual in a New Tab
Power Input (FC):
3S - 6S LiPo
Mounting (FC):
25.5 x 25.5 mm, 3 mm hole diameter
Dimension (FC):
36.5 mm (H) x 36.5 mm (W) x 7 mm (D), recommended for 3.5 inch or larger quads
Weight (FC):
10.1g
MCU (FC):
STM32F745
IMU(Gyro) (FC):
MPU6000
USB Connection (FC):
I need to solder the USB TYPE-C module to the D+, D-, GND pads.
Barometer (FC):
BMP280
OSD (FC):
Supported
BLE Bluetooth (FC):
Supported. Used for parameter configuration, internal single 2.4 GHz Wi-Fi and Bluetooth combo chip
Flash FC Firmware Wirelessly (FC):
Supported
Download/Analyze Blackbox (FC) :
Supported
DJI Air Unit 6-pin Connector (FC):
Internal.
Flash(for BlackBox) (FC):
8MB
Current Sensor (FC):
Supported. Scale=256
BetaFlight Camera Control Pad (FC):
Yes (CC pad)
5V Output (FC):
4 groups of 5V output. Total current load 2.5A.
9V Output (FC):
None
ESC Signal Pads (FC):
M1 - M4
UART (FC):
Full UART * 4 (UART1, UART2, UART3, UART4)
ESC Telemetry UART (FC):
None
LED Pad (FC):
Used for WS2812 LED
Buzzer (FC):
BZ+ and BZ- pads used for 5V Buzzer
BOOT Button (FC):
Used to enter DFU mode
Supported Flight Controller (FC):
BetaFlight (Default)
Firmware Target Name (FC):
SPEEDYBEE F745 AIO
Power Input (ESC):
3-6S LiPo
Continuous Current (ESC):
35A * 4
Burst Current (ESC):
45A (5 seconds)
ESC Protocol (ESC):
DSHOT300/600
Power Output (ESC):
VBAT
Current Sensor (ESC):
Supported (Scale=256)
Firmware (ESC):
