TUR
GEP-TAKER F411-12A-E 1~2S AIO
- Power Input: 1S-2S LiPo and LiHv battery
- Mounting: 25.5 mm*25.5 mm（M2）
- Dimensions: 30.5 mm*30.5 mm
- Weight: 4.2g
- Continuous Current: 12A
- Burst Current: 13A
Details
TAKER F411-12A-E 1~2S AIO is a lightweight and highly integrated flight control system weighing only 4.2g. It is suitable for 1.2-2 inch Whoop models or 3-inch toothpick models.
The 12A ESC's overcurrent capacity provides adequate redundancy for a small model, and the integrated ELRS2.4G 3.0 receiver saves more space and completes the setup. The F411 main controller is equipped with a BMI270 gyroscope, giving the flight a silky and stable feel.
Box Contents
- Image Available
Power Input (FC):
1S-2S LiPo battery
Mounting (FC):
25.5 mm*25.5 mm（M2）
Dimension (FC):
30.5 mm*30.5 mm
Weight (FC):
4.2g
MCU (FC):
STM32F411
IMU(Gyro) (FC):
BMI270
USB Connection (FC):
Micro USB
Barometer (FC):
Not specified
OSD (FC):
Betaflight OSD w/ AT7456Ev
BLE Bluetooth (FC):
Not supported
Flash FC Firmware Wirelessly (FC):
Micro USB
Download/Analyze Blackbox (FC) :
Not supported
DJI Air Unit 6-pin Connector (FC):
Not specified
Flash(for BlackBox) (FC):
Not specified
Current Sensor (FC):
Not specified
BetaFlight Camera Control Pad (FC):
Not specified
5V Output (FC):
4 x 5V output
9V Output (FC):
No
ESC Signal Pads (FC):
Not specified
UART (FC):
T1 R1 / T2 R2
ESC Telemetry UART (FC):
Not specified
LED Pad (FC):
Not specified
Buzzer (FC):
5V Buzzer pads used BZ+ and BZ- pads
BOOT Button (FC):
Supported, enter DFU mode to recover firmware by holding the BOOT button while powering on
Supported Flight Controller (FC):
BetaFlight
Firmware Target Name (FC):
TAKERF411
Power Input (ESC):
1-2S LiPo battery
Continuous Current (ESC):
12A
Burst Current (ESC):
13A
ESC Protocol (ESC):
Dshot300/600, Oneshot, Multishot
Power Output (ESC):
Not specified
Current Sensor (ESC):
Not specified
Firmware (ESC):
