Electronics Black Wrist Watch
Electronics Black Wrist Watch
Electronics Black Wrist Watch
Electronics Black Wrist Watch
Electronics Black Wrist Watch
Electronics Black Wrist Watch
Electronics Black Wrist Watch
Electronics Black Wrist Watch
Electronics Black Wrist Watch
Electronics Black Wrist Watch
Electronics Black Wrist Watch
Electronics Black Wrist Watch
Product Thumb
Product Thumb
Product Thumb
Product Thumb
Product Thumb
Product Thumb
Product Thumb
Product Thumb
Product Thumb
Product Thumb
Product Thumb
Product Thumb

T-MOTORHOBBY F7 45A AIO

Brand
Category: AIO
Kod: MS46891340
(Review Pending)
  • Power Input: 3-6S LiPo
  • Mounting: 25.5x25.5mm (3mm hole diameter)
  • Dimensions: 39x39mm
  • Weight: 10g
  • Continuous Current: 45A x4
  • Burst Current: 50A x4

Details

T-MOTORHOBBY F7 45A AIO is a compact 39x39mm FC+ESC all-in-one board featuring an STM32F722 MCU, MPU6500 gyro, and integrated BMP280 barometer. It provides 45A continuous current and 50A burst current per channel. The board features an AT7456E analog OSD chip and supports HD/digital VTX systems through MSP DisplayPort via the 8-pin JST connector. It includes 16MB of onboard blackbox flash memory. The mounting pattern is 25.5x25.5mm with a 3mm hole diameter, and the board weighs 10g. The BEC provides a 5V 1.5A output. The ESC firmware is BLS, based on BLHeli_S. Recommended motors include T-Motor P1804, F2004, and F2203.5. Note: This product shares the exact same marketing images and official manual PDFs (F7 AIO front/back) with the F7 35A AIO (goods-1259) from the same product family. This explains the dual 35A/45A and 40A/50A ratings shown in the shared specification table. Since the PDFs are scanned images, they do not contain machine-readable text.

Box Contents

1. Open Aio Manual in a New Tab
Click here to open the Aio Manual in a new tab
2. Download Aio Manual
Click here to download the Aio Manual
Aio: T-MOTORHOBBY F7 45A AIO Manual Connection Image
Open the Manual in a New Tab Manual Connection Image
    Power Input (FC):
    3-6S LiPo
    Mounting (FC):
    25.5 x 25.5 mm (3mm hole diameter)
    Dimension (FC):
    39 x 39 mm
    Weight (FC):
    10 g
    MCU (FC):
    STM32F722
    IMU(Gyro) (FC):
    MPU6500
    USB Connection (FC):
    Micro USB
    Barometer (FC):
    BMP280
    OSD (FC):
    Available (AT7456E analog OSD; HD/digital OSD support via MSP DisplayPort through the 8-pin JST connector)
    BLE Bluetooth (FC):
    Not specified
    Flash FC Firmware Wirelessly (FC):
    Not specified
    Download/Analyze Blackbox (FC) :
    Not specified
    DJI Air Unit 6-pin Connector (FC):
    Not specified (8-pin JST HD VTX connector is present, but it is not identified as a dedicated 6-pin DJI connector)
    Flash(for BlackBox) (FC):
    16 MB
    Current Sensor (FC):
    Not specified
    BetaFlight Camera Control Pad (FC):
    Not specified
    5V Output (FC):
    5V 1.5A
    9V Output (FC):
    Not specified
    ESC Signal Pads (FC):
    Not specified
    UART (FC):
    Not specified
    ESC Telemetry UART (FC):
    Not specified
    LED Pad (FC):
    Not specified
    Buzzer (FC):
    Not specified
    BOOT Button (FC):
    Available
    Supported Flight Controller (FC):
    Not specified
    Firmware Target Name (FC):
    Not specified
    Power Input (ESC):
    3-6S LiPo
    Continuous Current (ESC):
    45A (per channel)
    Burst Current (ESC):
    50A (per channel)
    ESC Protocol (ESC):
    Not specified
    Power Output (ESC):
    Not specified
    Current Sensor (ESC):
    Not specified
    Firmware (ESC):
    BLS (BLHeli_S-based ESC firmware)