Electronics Black Wrist Watch
Electronics Black Wrist Watch
Electronics Black Wrist Watch
Electronics Black Wrist Watch
Electronics Black Wrist Watch
Electronics Black Wrist Watch
Electronics Black Wrist Watch
Electronics Black Wrist Watch
Electronics Black Wrist Watch
Product Thumb
Product Thumb
Product Thumb
Product Thumb
Product Thumb
Product Thumb
Product Thumb
Product Thumb
Product Thumb

F722 35A AIO Brushless
Flight Controller V2

Brand
Category: AIO
Kod: MS46891340
(Review Pending)
  • Power Input: 2-6S LiPo
  • Mounting: 26mm x 26mm
  • MCU: STM32F722RET6
  • Weight: 9.00g (V2)
  • Continuous Current: 35A
  • Burst Current: 40A

Details

The F722 flight controller with a built-in STM32F722RET6 CPU is more powerful than F4; with fast processing and stable performance it provides reliable and smooth flight for 4-5 inch drones.
A dedicated 6-pin connector has been added for HD digital VTX; plug & play connection means less soldering.
The board has 6 full UARTs, giving more options for external parts such as VTX, GPS and receiver.
It handles 35A continuous (40A burst) current and supports 2-6S LiPo batteries. With a 6S battery it pushes past the power limit of toothpick drones and opens more possibilities for 4-5 inch drones.
This entry is the V2 version: the V2 board uses the AT32F421G8U7 ESC MCU with BLHeli_32.9 (32-bit) ESC firmware, supports 24k-128k PWM frequency and includes 16MB flash memory for Blackbox logging. (The V1 version uses BLUEJAY V0.16 8-bit ESC firmware and has no Blackbox.) The gyro is ICM42688; in Betaflight the gyro alignment should be set to CW270°. The power lead is an 80mm 14AWG silicone cable with an XT60 connector; it comes with a 470μF 35V capacitor. The manufacturer recommends 14XX, 15XX, 16XX, 18XX and 20XX motors.

Box Contents

Aio: F722 35A AIO Brushless <br>Flight Controller V2 Manual Connection Image
Open the Manual in a New Tab Manual Connection Image
    Power Input (FC):
    2S-6S LiPo
    Mounting (FC):
    26mm x 26mm
    Dimension (FC):
    Not specified by manufacturer
    Weight (FC):
    9.00g (V2, BLHeli_32) / 7.06g (V1, BLHeli_S)
    MCU (FC):
    STM32F722RET6
    IMU(Gyro) (FC):
    ICM42688
    USB Connection (FC):
    Not specified by manufacturer
    Barometer (FC):
    Not specified by manufacturer
    OSD (FC):
    Built-in BetaFlight OSD (OSD chip: AT7456E)
    BLE Bluetooth (FC):
    Not specified by manufacturer
    Flash FC Firmware Wirelessly (FC):
    Not specified by manufacturer
    Download/Analyze Blackbox (FC) :
    Supported (16MB, V2)
    DJI Air Unit 6-pin Connector (FC):
    Supported (6-pin connector for HD digital VTX)
    Flash(for BlackBox) (FC):
    16MB (V2)
    Current Sensor (FC):
    Built-in current sensor
    BetaFlight Camera Control Pad (FC):
    Not specified by manufacturer
    5V Output (FC):
    Not specified by manufacturer
    9V Output (FC):
    Not specified by manufacturer
    ESC Signal Pads (FC):
    Not specified by manufacturer
    UART (FC):
    6 full UARTs
    ESC Telemetry UART (FC):
    Not specified by manufacturer
    LED Pad (FC):
    Programmable LED support (WS2812 etc.)
    Buzzer (FC):
    Not specified by manufacturer
    BOOT Button (FC):
    Not specified by manufacturer
    Supported Flight Controller (FC):
    Betaflight (betaflight_4.3.0_STM32F7X2)
    Firmware Target Name (FC):
    Not specified by manufacturer
    Power Input (ESC):
    2S-6S LiPo
    Continuous Current (ESC):
    35A
    Burst Current (ESC):
    40A
    ESC Protocol (ESC):
    PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600
    Power Output (ESC):
    Not specified by manufacturer
    Current Sensor (ESC):
    Built-in current sensor
    Firmware (ESC):
    BLHeli_32.9, 32-bit (BETAFPV_35A_V2_BLHeli_32_Multi_32_9)