GEPRC TAKER F405 20A ELRS2.4G 2-4S AIO

Details

The GEPRC TAKER F405 20A ELRS2.4G 2-4S AIO is an AIO board that combines the flight controller and a 4in1 ESC on one board. Flight controller: STM32F405 (BGA) processor, ICM42688-P (SPI) gyro, 16Mb Blackbox, OSD: Betaflight OSD (AT7456E), USB: SH1.0 6-pin connector via Type-C configuration board, BEC 5V@2.5A, UART: R1-T1 / R2 / R3-T3 / R4-T4 / R5-T5 / R6-T6, 6-pin plug-and-play socket for HD/DJI digital VTX, buzzer, LED, firmware target GEPRC_TAKER_F405 AIO. ESC: input 2-4S LiPo, 20A continuous, 25A (10 seconds) burst, DShot600, Oneshot, Multishot, Bluejay. Board size 31.5x31.5mm, mounting 25.5x25.5mm (M3 grommets to M2 screws), weight 7g. It has a built-in ELRS 2.4GHz receiver and suits 1.6-2.2 inch micro FPV drones. Note: the manufacturer's summary says 5 full UARTs while the spec table lists R1-T1 / R2 / R3-T3 / R4-T4 / R5-T5 / R6-T6.

Box Contents

• 1 x TAKER F405 20A ELRS2.4G 2-4S AIO, 1 x XT30 18AWG 7cm power cable, 1 x 35V 220µF capacitor, 1 x 60mm SH1.0 6-pin dual-ended cable, 1 x SH1.0 6-pin cable, 1 x Type-C configuration board, 1 x 60mm SH1.0 5-pin dual-ended cable, 8 x M2x6.5mm black rubber grommets