Electronics Black Wrist Watch
Electronics Black Wrist Watch
Electronics Black Wrist Watch
Electronics Black Wrist Watch
Electronics Black Wrist Watch
Electronics Black Wrist Watch
Electronics Black Wrist Watch
Electronics Black Wrist Watch
Product Thumb
Product Thumb
Product Thumb
Product Thumb
Product Thumb
Product Thumb
Product Thumb
Product Thumb

HGLRC SPECTER F411 12A AIO

Brand
Category: AIO
Kod: MS46891340
(Review Pending)
  • Power Input: 2-4S LiPo
  • Mounting: 25.5x25.5mm (M2)
  • Dimensions: 32x32mm
  • Weight: 5.6g
  • Continuous Current: 12A
  • Burst Current: 15A (5 seconds)

Details

The HGLRC SPECTER F411 12A is a 2-4S AIO brushless flight controller with a built-in serial port (UART) ExpressLRS 2.4G receiver and a built-in 5.8GHz analog video transmitter (VTX). The UART-based built-in receiver offers more stable performance and signal than SPI receivers; the board has an IPEX antenna socket. To use an external CRSF receiver, the E5 and 5V pads must be shorted. The built-in VTX has 48 channels and adjustable 25/100/400mW output power; when using an external digital video system, the solder joint that disconnects the built-in VTX must be opened. It features an STM32F411 processor, ICM42688P gyro, AT7456E OSD, 16MB black box, LED and buzzer support and a 5V 1.5A BEC. It has independent 3-pin sockets for the motors. The ESCs come with BLHeli_S (Z-H-30) firmware by default and can also be flashed with Bluebird; it delivers 12A continuous and 15A (5 s) burst current. It is adapted to the HGLRC Draknight frame and compatible with 75mm, lightweight toothpick and whoop frames. Package contents: AIO, capacitor, 4 shock absorbers, VTX antenna and power cable.

Box Contents

1. Open Aio Manual in a New Tab
Click here to open the Aio Manual in a new tab
2. Download Aio Manual
Click here to download the Aio Manual
Aio: HGLRC SPECTER F411 12A AIO Manual Connection Image
Open the Manual in a New Tab Manual Connection Image
    Power Input (FC):
    2-4S LiPo
    Mounting (FC):
    25.5x25.5mm, M2
    Dimension (FC):
    32x32mm
    Weight (FC):
    5.6g
    MCU (FC):
    STM32F411
    IMU(Gyro) (FC):
    ICM42688P
    USB Connection (FC):
    Type-C
    Barometer (FC):
    Not specified
    OSD (FC):
    Supported (AT7456E)
    BLE Bluetooth (FC):
    Not specified
    Flash FC Firmware Wirelessly (FC):
    Not specified
    Download/Analyze Blackbox (FC) :
    Yes (16MB black box)
    DJI Air Unit 6-pin Connector (FC):
    No (external digital system via solder pads; built-in VTX disconnected at solder joint)
    Flash(for BlackBox) (FC):
    16MB
    Current Sensor (FC):
    Not specified
    BetaFlight Camera Control Pad (FC):
    Not specified
    5V Output (FC):
    5V 1.5A
    9V Output (FC):
    None
    ESC Signal Pads (FC):
    Not specified
    UART (FC):
    2 UARTs (UART1: video transmission OSD, UART2: CRSF receiver)
    ESC Telemetry UART (FC):
    Not specified
    LED Pad (FC):
    Yes
    Buzzer (FC):
    Yes
    BOOT Button (FC):
    Not specified
    Supported Flight Controller (FC):
    Betaflight (HGLRCF411SX1280_15A target)
    Firmware Target Name (FC):
    HGLRCF411SX1280_15A
    Power Input (ESC):
    2-4S LiPo
    Continuous Current (ESC):
    12A
    Burst Current (ESC):
    15A (5 seconds)
    ESC Protocol (ESC):
    DShot150/300/600
    Power Output (ESC):
    Not specified
    Current Sensor (ESC):
    Not specified
    Firmware (ESC):
    ESC: Z-H-30 (BLHeli_S, Bluebird flashable) / FC: HGLRCF411SX1280_15A