GEPRC FETTEC G4 ALPHA GF50A STACK

Detail

The GEPRC FETTEC G4 ALPHA GF50A STACK is a stack made of the GEPRC Fettec G4 Alpha flight controller with an STM32G473CEU6 processor and the GEPRC Fettec GF50A DShot2400 4in1 ESC. Flight controller: llM 42602 (as written by the manufacturer), Type-C USB, OSD: FETTEC OSD, dual BEC (5V@2A (maks. 2.5A) + 9V@2A (maks. 2.5A)), weight 6.6g, firmware target FETTEC ALPHA, supported firmware FETTEC Alpha. ESC: MCU STM32G071, input 2-6S LiPo, ammeter, 50A continuous, 55A burst, S2M+OW, S2M, DShot300-2400, size 32x32mm, mounting 30.5x30.5mm (M4), weight 13g, ESC target/firmware FETTEC. The flight controller ships with FETTEC Alpha firmware and the ESC with FETTEC firmware, supporting high-speed protocols such as S2M and DShot2400. All FC connections use SH1.0 sockets. Note: the manufacturer lists the ESC as a 32x32mm board with 30.5x30.5mm M4 mounting; FC size, mounting and input voltage are not specified.

Box contents

• 1 x GEPRC Fettec GF50A 4in1 DShot2400 ESC, 1 x GEPRC Fettec G4 Alpha FC, 2 x SH1.0 4pin 100mm silicone wire, 1 x SH1.0 6pin to SH1.0 7pin 60mm silicone cable, 1 x SH1.0 8pin 30mm silicone cable, 1 x SH1.0 7pin to 6pin 80mm silicone cable, 1 x XT60 power cable 110mm, 1 x 35V 1000uF capacitor, 4 x M3*24 hexagon socket screws, 4 x transparent M3 nylon nuts, 10 x M3*8 damping balls, 1 x product manual