Electronics Black Wrist Watch
Electronics Black Wrist Watch
Electronics Black Wrist Watch
Electronics Black Wrist Watch
Electronics Black Wrist Watch
Electronics Black Wrist Watch
Product Thumb
Product Thumb
Product Thumb
Product Thumb
Product Thumb
Product Thumb

GEPRC TAKER F745 BT 8Bit 60A STACK

Brand
Category: Stack
Kod: MS46891340
(Review Pending)
  • Power Input: 3-6S LiPo
  • Continuous Current (ESC): 60A
  • Mounting (ESC): 30.5x30.5mm
  • MCU: STM32F745
  • BEC: 5V@3A + 12V@2.5A
  • Burst Current (ESC): 65A (5 s)

Detail

The GEPRC TAKER F745 BT 8Bit 60A STACK is a stack made of the TAKER F745 BT flight controller with an STM32F745 processor and the TAKER H60_BLS 60A 4in1 ESC. Flight controller: MPU6000 + ICM42688-P (dual gyro), 512MB Blackbox, Bluetooth wireless tuning, barometer, Type-C USB, OSD: AT7456E, dual BEC (5V@3A + 12V@2.5A), 7 UARTs (UART3 fixed for Bluetooth), input 3-6S LiPo, size 38.5x38.5mm, mounting 30.5x30.5mm, weight 8.4g, firmware target GEPRCF745_BT_HD, supported firmware Betaflight, INAV, ArduPilot. ESC: input 3-6S LiPo, 60A continuous, 65A (5 s) burst, DShot150/300/600, size 42x45.7mm, mounting 30.5x30.5mm, weight 14.9g, ESC target/firmware B_X_30 (BLHeli_S). Note: In its announcement of Feb 25, 2026 the manufacturer states that, due to a temporary hardware adjustment, the current production batch does not support Bluetooth wireless tuning; all other flight controller and ESC functions work normally.

Box contents

  • Not specified by manufacturer
1. Open STACK Manual in a New Tab
Click here to open the STACK Manual in a new tab
2. Download STACK Manual
Click here to download the STACK Manual
STACK: GEPRC TAKER F745 BT 8Bit 60A STACK Manual Connection Image
Open the Manual in a New Tab Manual Connection Image
    MCU (FC):
    STM32F745
    IMU(Gyro)(FC):
    MPU6000 + ICM42688-P (dual gyro)
    USB Port Type (FC):
    Type-C
    Barometer (FC):
    Supported
    OSD Chip (FC):
    AT7456E
    BLE Bluetooth (FC):
    Supported (UART3)
    DJI Air Unit Connection Way (FC):
    DJI Air Unit plug-and-play connector
    6-pin DJI Air Unit Plug (FC):
    Supported
    Flash(for BlackBox) (FC):
    512MB
    BetaFlight Camera Control Pad (FC):
    Not specified by manufacturer
    Power Input (FC):
    3-6S LiPo
    5V Output (FC):
    5V@3A
    9V Output (FC):
    12V@2.5A
    3.3V Output (FC):
    Not specified by manufacturer
    4.5V Output (FC):
    Not specified by manufacturer
    ESC Signal Pads (FC):
    Not specified by manufacturer
    UART (FC):
    7 UARTs (UART3 fixed for Bluetooth)
    ESC Telemetry UART (FC):
    Not specified by manufacturer
    LED Pad (FC):
    Not specified by manufacturer
    Buzzer (FC):
    Not specified by manufacturer
    BOOT Button (FC):
    Not specified by manufacturer
    Supported Flight Controller Firmware (FC):
    Betaflight, INAV, ArduPilot
    Firmware Target Name (FC):
    GEPRCF745_BT_HD
    Mounting (FC):
    30.5x30.5mm
    Dimension (FC):
    38.5x38.5mm
    Weight (FC):
    8.4g
    Firmware (ESC):
    FC: GEPRCF745_BT_HD / ESC: B_X_30 (BLHeli_S)
    PC Configurator Download Link (ESC):
    https://github.com/betaflight/betaflight-configurator/releases
    Continuous Current (ESC):
    60A
    Burst Current (ESC):
    65A (5 s)
    TVS Protective diode (ESC):
    Not specified by manufacturer
    External Capacitor (ESC):
    Not specified by manufacturer
    ESC Protocol (ESC):
    DShot150/300/600
    Power Input (ESC):
    3-6S LiPo
    Power Output (ESC):
    Not specified by manufacturer
    Current Sensor (ESC):
    Not specified by manufacturer
    ESC Telemetry (ESC):
    No (BLHeli_S ESCs do not support telemetry)
    Mounting (ESC):
    30.5x30.5mm
    Dimension (ESC):
    42x45.7mm
    Weight (ESC):
    14.9g