Electronics Black Wrist Watch
Electronics Black Wrist Watch
Electronics Black Wrist Watch
Electronics Black Wrist Watch
Electronics Black Wrist Watch
Electronics Black Wrist Watch
Product Thumb
Product Thumb
Product Thumb
Product Thumb
Product Thumb
Product Thumb

GEPRC TAKER F405 BL32 70A STACK

Brand
Category: Stack
Kod: MS46891340
(Review Pending)
  • Power Input: 3-6S LiPo
  • Continuous Current (ESC): 70A
  • Mounting (ESC): 30.5x30.5mm (φ4mm hole, φ3mm with silicone dampers)
  • MCU: STM32F405
  • BEC: 5V@3A + 9V@2.5A
  • Burst Current (ESC): 80A (5 s)

Detail

The GEPRC TAKER F405 BL32 70A STACK is a stack made of the GEP-F405-HD V2 flight controller with an STM32F405 processor and the TAKER H70_96K 4in1 ESC. Flight controller: ICM42688-P (SPI), 16MB Blackbox, Type-C USB, OSD: AT7456E, dual BEC (5V@3A + 9V@2.5A), 6 UARTs, input 3-6S LiPo, size 36.8x36.8mm, mounting 30.5x30.5mm (φ4mm hole, φ3mm with silicone dampers), weight 7.7g, firmware target GEPRCF405, supported firmware Betaflight. ESC: input 3-6S LiPo, ammeter, PWM 24K-96K, 70A continuous, 80A (5 s) burst, DShot150/300/600, size 42.6x42.1mm, mounting 30.5x30.5mm (φ4mm hole, φ3mm with silicone dampers), weight 12.8g, ESC target/firmware GEPRC_G071_4IN1_96K.

Box contents

  • 1 x flight controller, 1 x ESC, 1 x capacitor, 1 x DJI Air Unit adapter cable, 1 x FC adapter cable, 1 x XT60 power cable, 4 x M3*30 and 4 x M3*25 screws, 8 x nylon nuts, 8 x silicone grommets, 2 x SH1.0 4pin silicone cable, 1 x camera connection cable
1. Open STACK Manual in a New Tab
Click here to open the STACK Manual in a new tab
2. Download STACK Manual
Click here to download the STACK Manual
STACK: GEPRC TAKER F405 BL32 70A STACK Manual Connection Image
Open the Manual in a New Tab Manual Connection Image
    MCU (FC):
    STM32F405
    IMU(Gyro)(FC):
    ICM42688-P (SPI)
    USB Port Type (FC):
    Type-C
    Barometer (FC):
    Not specified by manufacturer
    OSD Chip (FC):
    AT7456E
    BLE Bluetooth (FC):
    No
    DJI Air Unit Connection Way (FC):
    DJI Air Unit plug-and-play connector
    6-pin DJI Air Unit Plug (FC):
    Supported
    Flash(for BlackBox) (FC):
    16MB
    BetaFlight Camera Control Pad (FC):
    Not specified by manufacturer
    Power Input (FC):
    3-6S LiPo
    5V Output (FC):
    5V@3A
    9V Output (FC):
    9V@2.5A
    3.3V Output (FC):
    Not specified by manufacturer
    4.5V Output (FC):
    Not specified by manufacturer
    ESC Signal Pads (FC):
    Not specified by manufacturer
    UART (FC):
    6 UARTs
    ESC Telemetry UART (FC):
    Not specified by manufacturer
    LED Pad (FC):
    Yes (LED connector)
    Buzzer (FC):
    Not specified by manufacturer
    BOOT Button (FC):
    Not specified by manufacturer
    Supported Flight Controller Firmware (FC):
    Betaflight
    Firmware Target Name (FC):
    GEPRCF405
    Mounting (FC):
    30.5x30.5mm (φ4mm hole, φ3mm with silicone dampers)
    Dimension (FC):
    36.8x36.8mm
    Weight (FC):
    7.7g
    Firmware (ESC):
    FC: GEPRCF405 / ESC: GEPRC_G071_4IN1_96K
    PC Configurator Download Link (ESC):
    https://github.com/betaflight/betaflight-configurator/releases
    Continuous Current (ESC):
    70A
    Burst Current (ESC):
    80A (5 s)
    TVS Protective diode (ESC):
    Not specified by manufacturer
    External Capacitor (ESC):
    Capacitor included (value not specified)
    ESC Protocol (ESC):
    DShot150/300/600
    Power Input (ESC):
    3-6S LiPo
    Power Output (ESC):
    Not specified by manufacturer
    Current Sensor (ESC):
    Supported (ammeter)
    ESC Telemetry (ESC):
    Not specified by manufacturer
    Mounting (ESC):
    30.5x30.5mm (φ4mm hole, φ3mm with silicone dampers)
    Dimension (ESC):
    42.6x42.1mm
    Weight (ESC):
    12.8g