GEPRC SPAN F405 HD STACK
- Power Input: 3-6S LiPo
- Continuous Current (ESC): 50A
- Mounting (ESC): Not specified by manufacturer
- MCU: STM32F405
- BEC: 5V + 9V
- Burst Current (ESC): 55A (5 s)
Detail
The GEPRC SPAN F405 HD STACK is a stack made of the GEP-F405-HD flight controller with an STM32F405 processor and the GEP-G50A BL32 50A 4in1 ESC. Flight controller: MPU6000 (SPI), 16Mb Blackbox, Type-C USB, OSD: AT7456E, dual BEC (5V + 9V), 6 UARTs, input 3-6S LiPo, size 36x36mm, mounting φ4mm hole, φ3mm with grommets (hole spacing not specified), firmware target GEPRCF405, supported firmware Betaflight. ESC: MCU STM32F051K86, input 3-6S LiPo, ammeter, telemetry, 50A continuous, 55A (5 s) burst, DShot1200/DShot600, PWM, Multishot, OneShot, mounting Not specified by manufacturer, ESC target/firmware GEPRC-BL32-4IN1 (BLHeli_32). The manufacturer lists the BEC outputs as 5V and 9V without current ratings. BLHeliSuite32 is used for ESC configuration. Supported receiver protocols: SBUS, PPM, CRSF, DSMX, iBus.
Box contents
- 1 x GEP-F405-HD flight controller, 1 x GEPRC G50A ESC, 1 x 35V 470uF capacitor, 4 x M4-to-M3 silicone grommets, 4 x M3*22mm screws, 4 x M3*30mm screws, 1 x XT60 power cable, 1 x ESC cable, 1 x DJI cable

























