GEPRC TAKER F722 BT 8Bit 65A STACK
- Power Input: 3-6S LiPo
- Continuous Current (ESC): 65A
- Mounting (FC and ESC): 30.5x30.5mm
- MCU: STM32F722
- BEC: 5V@3A + 9V@2.5A
- Blackbox: 512MB / Bluetooth
Detail
The GEPRC TAKER F722 BT 8Bit 65A STACK is a stack made of the GEP-F722-BT-HD V3 flight controller with an STM32F722 processor and the TAKER H65_8S_BLS 65A 4in1 ESC. Flight controller: ICM42688-P (SPI), 512MB Blackbox, Bluetooth wireless tuning, barometer, integrated LC filter, Type-C USB, direct plug-in connector for the DJI Air Unit, BetaFlight OSD (AT7456E), dual independent BEC (5V@3A + 9V@2.5A), 5 UARTs (UART4 fixed for Bluetooth), input 3-6S LiPo, size 36.9x36.9mm, mounting 30.5x30.5mm, weight 8.2g, firmware target GEPRCF722_BT_HD_V3, supported firmware Betaflight. ESC: TAKER H65_8S_BLS 65A 4in1, input 3-8S LiPo (FC 3-6S), ammeter, 65A continuous, 70A burst (5 s), DShot150/300/600, size 42x45.7mm, 30.5x30.5mm mounting, weight 14.9g, ESC target B_X_30. Note: In its announcement of Feb 25, 2026 the manufacturer states that, due to a temporary hardware adjustment, the current production batch does not support Bluetooth wireless tuning; all other flight controller and ESC functions work normally.
Box contents
- 1 x flight controller, 1 x ESC, 1 x capacitor, 1 x O3 3-in-1 connection cable, 1 x FC adapter cable, 1 x SH1.0 4pin silicone cable, 1 x camera connection cable, 1 x VTX connection cable, 1 x XT60 power cable, 4 x M3*30 and 4 x M3*25 screws, 8 x nylon nuts, 12 x silicone anti-shake pads

























