Electronics Black Wrist Watch
Electronics Black Wrist Watch
Electronics Black Wrist Watch
Electronics Black Wrist Watch
Electronics Black Wrist Watch
Electronics Black Wrist Watch
Product Thumb
Product Thumb
Product Thumb
Product Thumb
Product Thumb
Product Thumb

GEPRC TAKER F405 BLS 50A STACK

Brand
Category: Stack
Kod: MS46891340
(Review Pending)
  • Power Input: 3-6S LiPo
  • Continuous Current (ESC): 50A
  • Mounting (FC and ESC): 30.5x30.5mm
  • MCU: STM32F405
  • BEC: 5V@3A + 9V@2.5A
  • Burst Current (ESC): 55A (5 seconds)

Detail

The GEPRC TAKER F405 BLS 50A STACK is a 3-6S stack made of the GEP-F405-HD V2 flight controller with an STM32F405 processor and the GEP-BLS50A-4IN1 4in1 ESC. Flight controller: ICM42688-P gyro (SPI), 16MB Blackbox, integrated LC filter, Type-C USB, direct plug-in connector for the DJI Air Unit, BetaFlight OSD (AT7456E), dual independent BEC (5V@3A + 9V@2.5A), 6 UARTs, input 3-6S LiPo, size 36.8x36.8mm, mounting 30.5x30.5mm, weight 7.7g, firmware target GEPRCF405. ESC: GEP-BLS50A-4IN1 4in1, input 3-6S LiPo, ammeter, 50A continuous, 55A burst (5 s), Oneshot125/Oneshot42/Multishot/DShot150/300/600, size 42.9x39.7mm, 30.5x30.5mm mounting (φ4mm hole, φ3mm with silicone dampers), weight 13.7g, ESC target G_H_30. The damped mounting keeps the gyro stable.

Box contents

  • 1 x flight controller, 1 x GEP-BLS50A-4IN1 4in1 ESC, 1 x capacitor, 1 x DJI Air Unit adapter cable, 1 x FC adapter cable, 1 x XT60 power cable, 4 x M3*30 and 4 x M3*24 screws, 8 x nylon nuts, 8 x silicone grommets, 2 x SH1.0 4pin silicone cable, 1 x camera connection cable
1. Open STACK Manual in a New Tab
Click here to open the STACK Manual in a new tab
2. Download STACK Manual
Click here to download the STACK Manual
STACK: GEPRC TAKER F405 BLS 50A STACK Manual Connection Image
Open the Manual in a New Tab Manual Connection Image
    MCU (FC):
    STM32F405
    IMU(Gyro)(FC):
    ICM42688-P
    USB Port Type (FC):
    Type-C
    Barometer (FC):
    Not specified by manufacturer
    OSD Chip (FC):
    AT7456E
    BLE Bluetooth (FC):
    No
    DJI Air Unit Connection Way (FC):
    DJI Air Unit plug-and-play connector
    6-pin DJI Air Unit Plug (FC):
    Supported
    Flash(for BlackBox) (FC):
    16MB
    BetaFlight Camera Control Pad (FC):
    Not specified by manufacturer
    Power Input (FC):
    3-6S LiPo
    5V Output (FC):
    5V@3A
    9V Output (FC):
    9V@2.5A
    3.3V Output (FC):
    Not specified by manufacturer
    4.5V Output (FC):
    Not specified by manufacturer
    ESC Signal Pads (FC):
    Not specified by manufacturer
    UART (FC):
    6 UARTs
    ESC Telemetry UART (FC):
    Not specified by manufacturer
    LED Pad (FC):
    Yes (LED connector)
    Buzzer (FC):
    Not specified by manufacturer
    BOOT Button (FC):
    Not specified by manufacturer
    Supported Flight Controller Firmware (FC):
    Betaflight
    Firmware Target Name (FC):
    GEPRCF405
    Mounting (FC):
    30.5x30.5mm (φ4mm hole, φ3mm with silicone dampers)
    Dimension (FC):
    36.8x36.8mm
    Weight (FC):
    7.7g
    Firmware (ESC):
    FC: GEPRCF405 / ESC: G_H_30 (BLHeli_S)
    PC Configurator Download Link (ESC):
    https://github.com/betaflight/betaflight-configurator/releases
    Continuous Current (ESC):
    50A
    Burst Current (ESC):
    55A (5 seconds)
    TVS Protective diode (ESC):
    Not specified by manufacturer
    External Capacitor (ESC):
    Capacitor included (value not specified)
    ESC Protocol (ESC):
    Oneshot125/Oneshot42/Multishot/DShot150/300/600
    Power Input (ESC):
    3-6S LiPo
    Power Output (ESC):
    Not specified by manufacturer
    Current Sensor (ESC):
    Supported (ammeter)
    ESC Telemetry (ESC):
    No (BLHeli_S ESCs do not support telemetry)
    Mounting (ESC):
    30.5x30.5mm (φ4mm hole, φ3mm with silicone dampers)
    Dimension (ESC):
    42.9x39.7mm
    Weight (ESC):
    13.7g