Electronics Black Wrist Watch
Electronics Black Wrist Watch
Electronics Black Wrist Watch
Electronics Black Wrist Watch
Electronics Black Wrist Watch
Product Thumb
Product Thumb
Product Thumb
Product Thumb
Product Thumb

GEPRC TAKER H743 BT 32Bit 50A STACK

Brand
Category: Stack
Kod: MS46891340
(Review Pending)
  • Power Input: 3-6S LiPo
  • Continuous Current (ESC): 50A
  • Mounting (FC and ESC): 30.5x30.5mm
  • MCU: STM32H743
  • BEC: 5V@3A + 12V@2.5A
  • Blackbox: 512MB / Bluetooth

Detail

The GEPRC TAKER H743 BT 32Bit 50A STACK is a stack made of the TAKER H743 BT flight controller with an STM32H743 processor and the GEP-BL32 50A 96K 4in1 ESC. Flight controller: MPU6000 + ICM42688-P (dual gyro), 512MB Blackbox, Bluetooth wireless tuning, barometer, integrated LC filter, Type-C USB, direct plug-in connector for the DJI Air Unit, BetaFlight OSD (AT7456E), dual independent BEC (5V@3A + 12V@2.5A), 7 UARTs (UART3 fixed for Bluetooth), 8 motor outputs (X8 compatible), input 3-6S LiPo, size 38.5x38.5mm, mounting 30.5x30.5mm, weight 8.4g, firmware target GEPRC_TAKER_H743, supported firmware Betaflight, INAV, ArduPilot. ESC: GEP-BL32 50A 96K 4in1, input 3-6S LiPo, 50A continuous, 55A burst (5 s), DShot150/300/600, size 42.5x42.1mm, 30.5x30.5mm mounting, weight 14g, ESC target ST_G0_05 – 31.92. Note: In its announcement of Feb 25, 2026 the manufacturer states that, due to a temporary hardware adjustment, the current production batch does not support Bluetooth wireless tuning; all other flight controller and ESC functions work normally.

Box contents

  • 1 x flight controller, 1 x ESC, 1 x capacitor, 1 x O3 3-in-1 connection cable, 1 x FC adapter cable, 1 x SH1.0 4pin silicone cable, 1 x camera connection cable, 1 x VTX connection cable, 1 x buzzer connection cable, 1 x XT60 power cable, 4 x M3*30 and 4 x M3*25 screws, 8 x nylon nuts, 12 x silicone anti-shake pads
1. Open STACK Manual in a New Tab
Click here to open the STACK Manual in a new tab
2. Download STACK Manual
Click here to download the STACK Manual
STACK: GEPRC TAKER H743 BT 32Bit 50A STACK Manual Connection Image
Open the Manual in a New Tab Manual Connection Image
    MCU (FC):
    STM32H743
    IMU(Gyro)(FC):
    MPU6000 + ICM42688-P (dual gyro)
    USB Port Type (FC):
    Type-C
    Barometer (FC):
    Supported
    OSD Chip (FC):
    AT7456E
    BLE Bluetooth (FC):
    Supported (UART3)
    DJI Air Unit Connection Way (FC):
    DJI Air Unit plug-and-play connector
    6-pin DJI Air Unit Plug (FC):
    Supported
    Flash(for BlackBox) (FC):
    512MB
    BetaFlight Camera Control Pad (FC):
    Not specified by manufacturer
    Power Input (FC):
    3-6S LiPo
    5V Output (FC):
    5V@3A
    9V Output (FC):
    12V@2.5A
    3.3V Output (FC):
    Not specified by manufacturer
    4.5V Output (FC):
    Not specified by manufacturer
    ESC Signal Pads (FC):
    8 motor outputs (X8 compatible)
    UART (FC):
    7 UARTs (UART3 fixed for Bluetooth)
    ESC Telemetry UART (FC):
    Not specified by manufacturer
    LED Pad (FC):
    Yes (LED 5V G pad)
    Buzzer (FC):
    Yes (buzzer connector)
    BOOT Button (FC):
    Not specified by manufacturer
    Supported Flight Controller Firmware (FC):
    Betaflight, INAV, ArduPilot
    Firmware Target Name (FC):
    GEPRC_TAKER_H743
    Mounting (FC):
    30.5x30.5mm
    Dimension (FC):
    38.5x38.5mm
    Weight (FC):
    8.4g
    Firmware (ESC):
    FC: GEPRC_TAKER_H743 / ESC: ST_G0_05 – 31.92
    PC Configurator Download Link (ESC):
    https://github.com/betaflight/betaflight-configurator/releases
    Continuous Current (ESC):
    50A
    Burst Current (ESC):
    55A (5 seconds)
    TVS Protective diode (ESC):
    Not specified by manufacturer
    External Capacitor (ESC):
    Capacitor included (value not specified)
    ESC Protocol (ESC):
    DShot150/300/600
    Power Input (ESC):
    3-6S LiPo
    Power Output (ESC):
    Not specified by manufacturer
    Current Sensor (ESC):
    Not specified by manufacturer
    ESC Telemetry (ESC):
    Supported
    Mounting (ESC):
    30.5x30.5mm
    Dimension (ESC):
    42.5x42.1mm
    Weight (ESC):
    14g