Electronics Black Wrist Watch
Electronics Black Wrist Watch
Electronics Black Wrist Watch
Electronics Black Wrist Watch
Electronics Black Wrist Watch
Electronics Black Wrist Watch
Product Thumb
Product Thumb
Product Thumb
Product Thumb
Product Thumb
Product Thumb

GEPRC STABLE PRO F7 DUAL BL32 35A STACK

Brand
Category: Stack
Kod: MS46891340
(Review Pending)
  • Power Input: 2-6S LiPo
  • Continuous Current (ESC): 35A
  • Mounting (ESC): 20x20mm (M2)
  • MCU: STM32F722RET6
  • BEC: 5V@3A
  • Burst Current (ESC): 45A

Detail

The GEPRC STABLE PRO F7 DUAL BL32 35A STACK is a 20x20mm mini stack made of the STABLE PRO F7 flight controller, the BLHeli_32 35A 4in1 ESC and a 600mW video transmitter. Flight controller: 2x ICM20689 (SPI, both work simultaneously), 32Mb Blackbox, OSD: AT7456E, BEC 5V@3A, input 2-6S LiPo, size 26x26mm, mounting 20x20mm (M2), firmware target EXF722DUAL, supported firmware Betaflight. ESC: MCU STM32F051, input 2-6S LiPo, ammeter, 35A continuous, 45A burst, DShot1200, Proshot, Oneshot, Multishot, size 31x31mm (güç pedleri dahil), mounting 20x20mm (M2), ESC target/firmware GEPRC-BL32-4IN1 (BLHeli_32). The soft damping design reduces FC and gyro noise. The included 5.8G VTX: 48 channels, 0 (PIT)/25/100/200/400/600mW, 5V input, 24x26mm, 20x20mm mounting, MMCX connector, 5V/1A BEC output for the camera, IRC Tramp, physical button, 2.3g. The stack measures 26x26x21mm and weighs 16.5g including wires and screws.

Box contents

  • 1 x flight controller, 1 x BLHeli_32 35A ESC, 1 x 5.8G 600mW VTX, 1 x antenna, 1 x capacitor, 5 x cable sets, 4 x M2*28mm screws, 16 x soft silicone
1. Open STACK Manual in a New Tab
Click here to open the STACK Manual in a new tab
2. Download STACK Manual
Click here to download the STACK Manual
STACK: GEPRC STABLE PRO F7 DUAL BL32 35A STACK Manual Connection Image
Open the Manual in a New Tab Manual Connection Image
    MCU (FC):
    STM32F722RET6
    IMU(Gyro)(FC):
    2x ICM20689 (SPI, both work simultaneously)
    USB Port Type (FC):
    Not specified by manufacturer
    Barometer (FC):
    No
    OSD Chip (FC):
    AT7456E
    BLE Bluetooth (FC):
    Not specified by manufacturer
    DJI Air Unit Connection Way (FC):
    Not specified by manufacturer
    6-pin DJI Air Unit Plug (FC):
    Not specified by manufacturer
    Flash(for BlackBox) (FC):
    32Mb
    BetaFlight Camera Control Pad (FC):
    Not specified by manufacturer
    Power Input (FC):
    2-6S LiPo
    5V Output (FC):
    5V@3A
    9V Output (FC):
    Not specified by manufacturer
    3.3V Output (FC):
    Not specified by manufacturer
    4.5V Output (FC):
    Not specified by manufacturer
    ESC Signal Pads (FC):
    Not specified by manufacturer
    UART (FC):
    Not specified by manufacturer
    ESC Telemetry UART (FC):
    Not specified by manufacturer
    LED Pad (FC):
    Not specified by manufacturer
    Buzzer (FC):
    Not specified by manufacturer
    BOOT Button (FC):
    Not specified by manufacturer
    Supported Flight Controller Firmware (FC):
    Betaflight
    Firmware Target Name (FC):
    EXF722DUAL
    Mounting (FC):
    20x20mm (M2)
    Dimension (FC):
    26x26mm
    Weight (FC):
    Not specified by manufacturer
    Firmware (ESC):
    FC: EXF722DUAL / ESC: GEPRC-BL32-4IN1 (BLHeli_32)
    PC Configurator Download Link (ESC):
    https://github.com/betaflight/betaflight-configurator/releases
    Continuous Current (ESC):
    35A
    Burst Current (ESC):
    45A
    TVS Protective diode (ESC):
    Not specified by manufacturer
    External Capacitor (ESC):
    Capacitor included (value not specified)
    ESC Protocol (ESC):
    DShot1200, Proshot, Oneshot, Multishot
    Power Input (ESC):
    2-6S LiPo
    Power Output (ESC):
    Not specified by manufacturer
    Current Sensor (ESC):
    Yes
    ESC Telemetry (ESC):
    Not specified by manufacturer
    Mounting (ESC):
    20x20mm (M2)
    Dimension (ESC):
    31x31mm (güç pedleri dahil)
    Weight (ESC):
    Not specified by manufacturer