Electronics Black Wrist Watch
Electronics Black Wrist Watch
Electronics Black Wrist Watch
Electronics Black Wrist Watch
Electronics Black Wrist Watch
Electronics Black Wrist Watch
Product Thumb
Product Thumb
Product Thumb
Product Thumb
Product Thumb
Product Thumb

GEPRC TAKER H743 BT 32Bit 65A STACK

Brand
Category: Stack
Kod: MS46891340
(Review Pending)
  • Power Input: 3-6S LiPo
  • Continuous Current (ESC): 65A
  • Mounting (FC and ESC): 30.5x30.5mm
  • MCU: STM32H743
  • BEC: 5V@3A + 12V@2.5A
  • Blackbox: 512MB / Bluetooth

Detail

The GEPRC TAKER H743 BT 32Bit 65A STACK is a stack made of the TAKER H743 BT flight controller with an STM32H743 processor and the TAKER H65_8S_32Bit 65A 4in1 ESC. Flight controller: MPU6000 + ICM42688-P (dual gyro), 512MB Blackbox, Bluetooth wireless tuning, barometer, integrated LC filter, Type-C USB, direct plug-in connector for the DJI Air Unit, BetaFlight OSD (AT7456E), dual independent BEC (5V@3A + 12V@2.5A), 7 UARTs (UART3 fixed for Bluetooth), 8 motor outputs (X8 compatible), input 3-6S LiPo, size 38.5x38.5mm, mounting 30.5x30.5mm, weight 8.4g, firmware target GEPRC_TAKER_H743, supported firmware Betaflight, INAV, ArduPilot. ESC: TAKER H65_8S_32Bit 65A 4in1, input 3-8S LiPo (stack supports 3-6S only), ammeter, 65A continuous, 70A burst (5 s), DShot150/300/600, size 42x45.7mm, 30.5x30.5mm mounting, weight 15.8g, ESC target GEPRC_F4_4in1. Note: In its announcement of Feb 25, 2026 the manufacturer states that, due to a temporary hardware adjustment, the current production batch does not support Bluetooth wireless tuning; all other flight controller and ESC functions work normally.

Box contents

  • 1 x TAKER H743 BT flight controller, 1 x TAKER H65_8S_32Bit 65A 4in1 ESC, 1 x electrolytic capacitor (50V 1000uF), DJI connection cable (SH1.0 6pin 100mm), 1 x FC adapter cable (SH1.0 8pin 30mm), receiver cable (SH1.0 4pin 150mm), camera cable (SH1.0-SH1.25 3pin 60mm), VTX cable (SH1.0 4-6pin 100mm), 1 x XT60 power cable (12AWG 110mm), 4 x M3*30 and 4 x M3*25 screws, 8 x M3 nylon nuts, 12 x M3 silicone anti-shake pads
1. Open STACK Manual in a New Tab
Click here to open the STACK Manual in a new tab
2. Download STACK Manual
Click here to download the STACK Manual
STACK: GEPRC TAKER H743 BT 32Bit 65A STACK Manual Connection Image
Open the Manual in a New Tab Manual Connection Image
    MCU (FC):
    STM32H743
    IMU(Gyro)(FC):
    MPU6000 + ICM42688-P (dual gyro)
    USB Port Type (FC):
    Type-C
    Barometer (FC):
    Supported
    OSD Chip (FC):
    AT7456E
    BLE Bluetooth (FC):
    Supported (UART3)
    DJI Air Unit Connection Way (FC):
    DJI Air Unit plug-and-play connector
    6-pin DJI Air Unit Plug (FC):
    Supported
    Flash(for BlackBox) (FC):
    512MB
    BetaFlight Camera Control Pad (FC):
    Not specified by manufacturer
    Power Input (FC):
    3-6S LiPo
    5V Output (FC):
    5V@3A
    9V Output (FC):
    12V@2.5A
    3.3V Output (FC):
    Not specified by manufacturer
    4.5V Output (FC):
    Not specified by manufacturer
    ESC Signal Pads (FC):
    8 motor outputs (X8 compatible)
    UART (FC):
    7 UARTs (UART3 fixed for Bluetooth)
    ESC Telemetry UART (FC):
    Not specified by manufacturer
    LED Pad (FC):
    Yes (LED 5V G pad)
    Buzzer (FC):
    Yes (buzzer connector)
    BOOT Button (FC):
    Not specified by manufacturer
    Supported Flight Controller Firmware (FC):
    Betaflight, INAV, ArduPilot
    Firmware Target Name (FC):
    GEPRC_TAKER_H743
    Mounting (FC):
    30.5x30.5mm
    Dimension (FC):
    38.5x38.5mm
    Weight (FC):
    8.4g
    Firmware (ESC):
    FC: GEPRC_TAKER_H743 / ESC: GEPRC_F4_4in1
    PC Configurator Download Link (ESC):
    https://github.com/betaflight/betaflight-configurator/releases
    Continuous Current (ESC):
    65A
    Burst Current (ESC):
    70A (5 seconds)
    TVS Protective diode (ESC):
    Not specified by manufacturer
    External Capacitor (ESC):
    50V 1000uF electrolytic capacitor included
    ESC Protocol (ESC):
    DShot150/300/600
    Power Input (ESC):
    3-8S LiPo (stack supports 3-6S only)
    Power Output (ESC):
    Not specified by manufacturer
    Current Sensor (ESC):
    Supported (ammeter)
    ESC Telemetry (ESC):
    Not specified by manufacturer
    Mounting (ESC):
    30.5x30.5mm (φ4mm hole, φ3mm with silicone dampers)
    Dimension (ESC):
    42x45.7mm
    Weight (ESC):
    15.8g