Electronics Black Wrist Watch
Electronics Black Wrist Watch
Electronics Black Wrist Watch
Electronics Black Wrist Watch
Electronics Black Wrist Watch
Electronics Black Wrist Watch
Product Thumb
Product Thumb
Product Thumb
Product Thumb
Product Thumb
Product Thumb

GEPRC STABLE F411 STACK

Brand
Category: Stack
Kod: MS46891340
(Review Pending)
  • Power Input: 2-4S LiPo
  • Continuous Current (ESC): 12A
  • Mounting (ESC): 16x16mm
  • MCU: STM32F411
  • BEC: 5V@2A
  • Burst Current (ESC): Not specified by manufacturer

Detail

The GEPRC STABLE F411 STACK is a three-layer micro stack with 16x16mm mounting, made of a flight controller, a 4in1 12A ESC and a 200mW video transmitter. Flight controller: MPU6000 (SPI), OSD: AT7456E, BEC 5V@2A, input 2-4S LiPo, size 21x21mm, mounting 16x16mm, weight 2.5g, firmware target GEPRCF411, supported firmware Betaflight. ESC: MCU BB21F16G, input 2-4S LiPo, ammeter, 12A continuous, PWM, Oneshot125, Multishot, DShot150/300/600, size 23x21mm, mounting 16x16mm, weight 2.7g, ESC target/firmware G_H_30 (BLHeli_S). VTX: 5.8G, PIT/25/100/200mW, IPEX (U.FL) antenna, IRC Tramp, 17x27mm, 16x16mm mounting, 1.6g. LED strips can be programmed from Betaflight via the LED connector; VTX and flight settings can be changed from the OSD. Supported receiver protocols: SBUS, PPM, CRSF, DSMX, iBus.

Box contents

  • 1 x STABLE F411 flight controller, 1 x STABLE F411 BLHeli_S 4in1 12A ESC, 1 x STABLE F411 5.8G 200mW VTX, 1 x 5.8G antenna, 1 x XT30 cable
1. Open STACK Manual in a New Tab
Click here to open the STACK Manual in a new tab
2. Download STACK Manual
Click here to download the STACK Manual
STACK: GEPRC STABLE F411 STACK Manual Connection Image
Open the Manual in a New Tab Manual Connection Image
    MCU (FC):
    STM32F411
    IMU(Gyro)(FC):
    MPU6000 (SPI)
    USB Port Type (FC):
    Not specified by manufacturer
    Barometer (FC):
    Not specified by manufacturer
    OSD Chip (FC):
    AT7456E
    BLE Bluetooth (FC):
    Not specified by manufacturer
    DJI Air Unit Connection Way (FC):
    Not specified by manufacturer
    6-pin DJI Air Unit Plug (FC):
    Not specified by manufacturer
    Flash(for BlackBox) (FC):
    Not specified by manufacturer
    BetaFlight Camera Control Pad (FC):
    Not specified by manufacturer
    Power Input (FC):
    2-4S LiPo
    5V Output (FC):
    5V@2A
    9V Output (FC):
    Not specified by manufacturer
    3.3V Output (FC):
    Not specified by manufacturer
    4.5V Output (FC):
    Not specified by manufacturer
    ESC Signal Pads (FC):
    Not specified by manufacturer
    UART (FC):
    Not specified by manufacturer
    ESC Telemetry UART (FC):
    Not specified by manufacturer
    LED Pad (FC):
    Yes (LED connector)
    Buzzer (FC):
    Not specified by manufacturer
    BOOT Button (FC):
    Not specified by manufacturer
    Supported Flight Controller Firmware (FC):
    Betaflight
    Firmware Target Name (FC):
    GEPRCF411
    Mounting (FC):
    16x16mm
    Dimension (FC):
    21x21mm
    Weight (FC):
    2.5g
    Firmware (ESC):
    FC: GEPRCF411 / ESC: G_H_30 (BLHeli_S)
    PC Configurator Download Link (ESC):
    https://github.com/betaflight/betaflight-configurator/releases
    Continuous Current (ESC):
    12A
    Burst Current (ESC):
    Not specified by manufacturer
    TVS Protective diode (ESC):
    Not specified by manufacturer
    External Capacitor (ESC):
    Not specified by manufacturer
    ESC Protocol (ESC):
    PWM, Oneshot125, Multishot, DShot150/300/600
    Power Input (ESC):
    2-4S LiPo
    Power Output (ESC):
    Not specified by manufacturer
    Current Sensor (ESC):
    Supported (current meter scale 210)
    ESC Telemetry (ESC):
    No (BLHeli_S ESCs do not support telemetry)
    Mounting (ESC):
    16x16mm
    Dimension (ESC):
    23x21mm
    Weight (ESC):
    2.7g