Electronics Black Wrist Watch
Electronics Black Wrist Watch
Electronics Black Wrist Watch
Electronics Black Wrist Watch
Electronics Black Wrist Watch
Electronics Black Wrist Watch
Product Thumb
Product Thumb
Product Thumb
Product Thumb
Product Thumb
Product Thumb

GEPRC STABLE V2 F4 30A STACK

Brand
Category: Stack
Kod: MS46891340
(Review Pending)
  • Power Input: 2-5S LiPo
  • Continuous Current (ESC): 30A
  • Mounting (ESC): 20x20mm (M2)
  • MCU: STM32F405
  • BEC: 5V@3A
  • Burst Current (ESC): 35A

Detail

The GEPRC STABLE V2 F4 30A STACK is a 20x20mm mini stack made of the STABLE V2 F4 flight controller, the BLHeli_S 30A 4in1 ESC and a 600mW video transmitter. Flight controller: MPU6000 (SPI), OSD: AT7456E, BEC 5V@3A, size 26x26mm, mounting 20x20mm (M2), firmware target OmnibusF4SD, supported firmware Betaflight. ESC: input 2-5S LiPo, ammeter, 30A continuous, 35A burst, DShot600, Proshot, Oneshot, Multishot, size 31x31mm (güç pedleri dahil), mounting 20x20mm (M2), ESC target/firmware G_H_30 (BLHeli_S). The soft damping design reduces FC and gyro noise. The included 5.8G VTX: 48 channels, 0 (PIT)/25/100/200/400/600mW, 5V input, 24x26mm, 20x20mm mounting, MMCX connector, 5V/1A BEC output for the camera, IRC Tramp, physical button, 2.3g. The stack measures 26x26x21mm and weighs 16.5g including wires and screws.

Box contents

  • 1 x flight controller, 1 x BLHeli_S 30A ESC, 1 x 5.8G 600mW VTX, 1 x antenna, 1 x capacitor, 5 x cable sets, 4 x M2*28mm screws, 16 x soft silicone
1. Open STACK Manual in a New Tab
Click here to open the STACK Manual in a new tab
2. Download STACK Manual
Click here to download the STACK Manual
STACK: GEPRC STABLE V2 F4 30A STACK Manual Connection Image
Open the Manual in a New Tab Manual Connection Image
    MCU (FC):
    STM32F405
    IMU(Gyro)(FC):
    MPU6000 (SPI)
    USB Port Type (FC):
    Not specified by manufacturer
    Barometer (FC):
    No
    OSD Chip (FC):
    AT7456E
    BLE Bluetooth (FC):
    Not specified by manufacturer
    DJI Air Unit Connection Way (FC):
    Not specified by manufacturer
    6-pin DJI Air Unit Plug (FC):
    Not specified by manufacturer
    Flash(for BlackBox) (FC):
    Not specified by manufacturer
    BetaFlight Camera Control Pad (FC):
    Not specified by manufacturer
    Power Input (FC):
    Not specified by manufacturer
    5V Output (FC):
    5V@3A
    9V Output (FC):
    Not specified by manufacturer
    3.3V Output (FC):
    Not specified by manufacturer
    4.5V Output (FC):
    Not specified by manufacturer
    ESC Signal Pads (FC):
    Not specified by manufacturer
    UART (FC):
    Not specified by manufacturer
    ESC Telemetry UART (FC):
    Not specified by manufacturer
    LED Pad (FC):
    Not specified by manufacturer
    Buzzer (FC):
    Not specified by manufacturer
    BOOT Button (FC):
    Not specified by manufacturer
    Supported Flight Controller Firmware (FC):
    Betaflight
    Firmware Target Name (FC):
    OmnibusF4SD
    Mounting (FC):
    20x20mm (M2)
    Dimension (FC):
    26x26mm
    Weight (FC):
    Not specified by manufacturer
    Firmware (ESC):
    FC: OmnibusF4SD / ESC: G_H_30 (BLHeli_S)
    PC Configurator Download Link (ESC):
    https://github.com/betaflight/betaflight-configurator/releases
    Continuous Current (ESC):
    30A
    Burst Current (ESC):
    35A
    TVS Protective diode (ESC):
    Not specified by manufacturer
    External Capacitor (ESC):
    Capacitor included (value not specified)
    ESC Protocol (ESC):
    DShot600, Proshot, Oneshot, Multishot
    Power Input (ESC):
    2-5S LiPo
    Power Output (ESC):
    Not specified by manufacturer
    Current Sensor (ESC):
    Yes
    ESC Telemetry (ESC):
    No (BLHeli_S ESCs do not support telemetry)
    Mounting (ESC):
    20x20mm (M2)
    Dimension (ESC):
    31x31mm (güç pedleri dahil)
    Weight (ESC):
    Not specified by manufacturer