Electronics Black Wrist Watch
Electronics Black Wrist Watch
Electronics Black Wrist Watch
Electronics Black Wrist Watch
Electronics Black Wrist Watch
Electronics Black Wrist Watch
Product Thumb
Product Thumb
Product Thumb
Product Thumb
Product Thumb
Product Thumb

GEPRC SPAN F722-BT-HD V2 STACK

Brand
Category: Stack
Kod: MS46891340
(Review Pending)
  • Power Input: 3-6S LiPo
  • Continuous Current (ESC): 50A
  • Mounting (ESC): 30.5x30.5mm
  • MCU: STM32F722RET6
  • BEC: 5V@3A + 12V@3A
  • Burst Current (ESC): 55A (5 s)

Detail

The GEPRC SPAN F722-BT-HD V2 STACK is a stack made of the SPAN F722-BT-HD V2 flight controller with an STM32F722RET6 processor and the BL32 50A 96K 4in1 ESC. Flight controller: ICM42688-P (SPI), 512MB (dahili SD kart) Blackbox, Bluetooth wireless tuning, Type-C USB, OSD: AT7456E, dual BEC (5V@3A + 12V@3A), 5 UARTs, input 3-6S LiPo, size 36x36mm, mounting 30.5x30.5mm (φ4mm hole, φ3mm with grommets), firmware target GEPRCF722-BT-HD, supported firmware Betaflight. ESC: MCU STM32G071, input 3-6S LiPo, ammeter, telemetry, PWM 96K, 50A continuous, 55A (5 s) burst, DShot600, PWM, Multishot, OneShot, mounting 30.5x30.5mm, ESC target/firmware GEPRC_G071_4IN1_96K (BLHeli_32). According to the manufacturer the stack is designed mainly for the MARK5 frame and also fits frames with 30.5x30.5mm FC mounting. Note: the manufacturer writes the ESC MCU as "SMT32G071".

Box contents

  • 1 x flight controller, 1 x ESC, 1 x capacitor, 1 x DJI Air Unit adapter cable, 1 x FC adapter cable, 1 x XT60 power cable, 4 x M3*30 and 4 x M3*24 screws, 8 x nylon nuts, 4 x silicone grommets
1. Open STACK Manual in a New Tab
Click here to open the STACK Manual in a new tab
2. Download STACK Manual
Click here to download the STACK Manual
STACK: GEPRC SPAN F722-BT-HD V2 STACK Manual Connection Image
Open the Manual in a New Tab Manual Connection Image
    MCU (FC):
    STM32F722RET6
    IMU(Gyro)(FC):
    ICM42688-P (SPI)
    USB Port Type (FC):
    Type-C
    Barometer (FC):
    Not specified by manufacturer
    OSD Chip (FC):
    AT7456E
    BLE Bluetooth (FC):
    Supported
    DJI Air Unit Connection Way (FC):
    DJI Air Unit plug-and-play connector
    6-pin DJI Air Unit Plug (FC):
    Supported
    Flash(for BlackBox) (FC):
    512MB (dahili SD kart)
    BetaFlight Camera Control Pad (FC):
    Not specified by manufacturer
    Power Input (FC):
    3-6S LiPo
    5V Output (FC):
    5V@3A
    9V Output (FC):
    12V@3A
    3.3V Output (FC):
    Not specified by manufacturer
    4.5V Output (FC):
    Not specified by manufacturer
    ESC Signal Pads (FC):
    Not specified by manufacturer
    UART (FC):
    5 UARTs
    ESC Telemetry UART (FC):
    Not specified by manufacturer
    LED Pad (FC):
    Not specified by manufacturer
    Buzzer (FC):
    Not specified by manufacturer
    BOOT Button (FC):
    Not specified by manufacturer
    Supported Flight Controller Firmware (FC):
    Betaflight
    Firmware Target Name (FC):
    GEPRCF722-BT-HD
    Mounting (FC):
    30.5x30.5mm (φ4mm hole, φ3mm with grommets)
    Dimension (FC):
    36x36mm
    Weight (FC):
    Not specified by manufacturer
    Firmware (ESC):
    FC: GEPRCF722-BT-HD / ESC: GEPRC_G071_4IN1_96K (BLHeli_32)
    PC Configurator Download Link (ESC):
    https://github.com/betaflight/betaflight-configurator/releases
    Continuous Current (ESC):
    50A
    Burst Current (ESC):
    55A (5 s)
    TVS Protective diode (ESC):
    Not specified by manufacturer
    External Capacitor (ESC):
    Capacitor included (value not specified)
    ESC Protocol (ESC):
    DShot600, PWM, Multishot, OneShot
    Power Input (ESC):
    3-6S LiPo
    Power Output (ESC):
    Not specified by manufacturer
    Current Sensor (ESC):
    Supported (ammeter)
    ESC Telemetry (ESC):
    Supported
    Mounting (ESC):
    30.5x30.5mm
    Dimension (ESC):
    Not specified by manufacturer
    Weight (ESC):
    Not specified by manufacturer