GEPRC GEP-F405-HD V2 FLIGHT CONTROLLER

Brand
Category: FC
Kod: MS46891340

  • Power Input: 3-6S LiPo
  • MCU: STM32F405
  • Mounting: 30.5x30.5mm (φ4mm hole, φ3mm with silicone dampers)
  • BEC: 5V@3A + 9V@2.5A
  • Blackbox: 16MB
  • Weight: 7.7g

Detail

The GEPRC GEP-F405-HD V2 FLIGHT CONTROLLER is a GEPRC flight controller. Specs: STM32F405 processor, ICM42688-P (SPI) gyro, 16MB Blackbox, OSD: AT7456E, Type-C USB, DJI Air Unit plug-and-play connector, BEC 5V@3A + 9V@2.5A, 6 UARTs, input 3-6S LiPo, size 36.8x36.8mm, mounting 30.5x30.5mm (φ4mm hole, φ3mm with silicone dampers), weight 7.7g, firmware target GEPRCF405, supported firmware Betaflight.

Box contents

  • 1 x flight controller, 1 x DJI Air Unit adapter cable, 1 x FC adapter cable, 4 x nylon nuts, 4 x silicone grommets, 2 x SH1.0 4-pin silicone cable, 1 x camera connection cable
1. Open FC Manual in a New Tab
Click here to open the FC Manual in a new tab
2. Download FC Manual
Click here to download the FC Manual
FC: GEPRC GEP-F405-HD V2 FLIGHT CONTROLLER Manual Connection Image
Open the Manual in a New Tab Manual Connection Image
    MCU:
    STM32F405
    IMU(Gyro):
    ICM42688-P (SPI)
    USB Port Type:
    Type-C
    Barometer:
    Not specified by manufacturer
    OSD Chip :
    AT7456E
    BLE Bluetooth :
    No
    DJI Air Unit Connection Way :
    DJI Air Unit plug-and-play connector
    6-pin DJI Air Unit Plug :
    Supported
    Flash(for BlackBox) :
    16MB
    BetaFlight Camera Control Pad :
    Not specified by manufacturer
    Power Input :
    3-6S LiPo
    5V Output :
    5V@3A
    9V Output :
    9V@2.5A
    3.3V Output :
    Not specified by manufacturer
    4.5V Output :
    Not specified by manufacturer
    ESC Signal Pads :
    Not specified by manufacturer
    UART :
    6 UARTs
    ESC Telemetry UART :
    Not specified by manufacturer
    LED Pad :
    Yes (LED connector)
    Buzzer :
    Not specified by manufacturer
    BOOT Button :
    Not specified by manufacturer
    Supported Flight Controller Firmware :
    Betaflight
    Firmware Target Name :
    GEPRCF405
    Mounting :
    30.5x30.5mm (φ4mm hole, φ3mm with silicone dampers)
    Dimension :
    36.8x36.8mm
    Weight:
    7.7g