Electronics Black Wrist Watch
Product Thumb

GEPRC TAKER H743 MINI FLIGHT CONTROLLER

Brand
Category: FC
Kod: MS46891340
(Review Pending)
  • Power Input: 3-8S LiPo
  • MCU: STM32H743
  • Mounting: 20x20mm
  • BEC: 5V@3A + 12V@2.5A
  • Blackbox: 16MB
  • Weight: 6.1g

Detail

The GEPRC TAKER H743 MINI FLIGHT CONTROLLER is a GEPRC flight controller. Specs: STM32H743 processor, ICM42688-P (SPI) gyro, 16MB Blackbox, barometer, Bluetooth wireless tuning, OSD: AT7456E, Type-C USB, DJI plug & play connector, BEC 5V@3A + 12V@2.5A, 7 UARTs (UART8 reserved for Bluetooth), 8 motor outputs (X8 support), input 3-8S LiPo, size 31x31mm, mounting 20x20mm, weight 6.1g, firmware target GEPRC_TAKER_H743MINI, supported firmware Betaflight. It supports an external gyro clock input (ICM42688P, Betaflight 2025.12.1 or later) and a 12V BEC that can be switched from the radio. Note: the manufacturer writes the firmware target as "GEPRC TAKER H743 MINI" in the page text and "GEPRC_TAKER_H743MINI" in the spec image.

Box contents

  • Not specified by manufacturer
1. Open FC Manual in a New Tab
Click here to open the FC Manual in a new tab
2. Download FC Manual
Click here to download the FC Manual
FC: GEPRC TAKER H743 MINI FLIGHT CONTROLLER Manual Connection Image
Open the Manual in a New Tab Manual Connection Image
    MCU:
    STM32H743
    IMU(Gyro):
    ICM42688-P (SPI)
    USB Port Type:
    Type-C
    Barometer:
    Supported
    OSD Chip :
    AT7456E
    BLE Bluetooth :
    Supported (UART8)
    DJI Air Unit Connection Way :
    DJI plug & play connector
    6-pin DJI Air Unit Plug :
    Supported
    Flash(for BlackBox) :
    16MB
    BetaFlight Camera Control Pad :
    Not specified by manufacturer
    Power Input :
    3-8S LiPo
    5V Output :
    5V@3A
    9V Output :
    12V@2.5A
    3.3V Output :
    Not specified by manufacturer
    4.5V Output :
    Not specified by manufacturer
    ESC Signal Pads :
    8 motor outputs (X8 support)
    UART :
    7 UARTs (UART8 reserved for Bluetooth)
    ESC Telemetry UART :
    Not specified by manufacturer
    LED Pad :
    Not specified by manufacturer
    Buzzer :
    Not specified by manufacturer
    BOOT Button :
    BOOT pad
    Supported Flight Controller Firmware :
    Betaflight
    Firmware Target Name :
    GEPRC_TAKER_H743MINI
    Mounting :
    20x20mm
    Dimension :
    31x31mm
    Weight:
    6.1g