Electronics Black Wrist Watch
Electronics Black Wrist Watch
Electronics Black Wrist Watch
Electronics Black Wrist Watch
Electronics Black Wrist Watch
Electronics Black Wrist Watch
Product Thumb
Product Thumb
Product Thumb
Product Thumb
Product Thumb
Product Thumb

GEPRC GEP-F722-BT-HD V3 FLIGHT CONTROLLER

Brand
Category: FC
Kod: MS46891340
(Review Pending)
  • Power Input: 3-6S LiPo
  • MCU: STM32F722
  • Mounting: 30.5x30.5mm (φ4mm hole, φ3mm with silicone dampers)
  • BEC: 5V@3A + 9V@2.5A
  • Blackbox: 512MB
  • Weight: 8.2g

Detail

The GEPRC GEP-F722-BT-HD V3 FLIGHT CONTROLLER is a GEPRC flight controller. Specs: STM32F722 processor, ICM42688-P (SPI) gyro, 512MB Blackbox, barometer, Bluetooth wireless tuning, OSD: AT7456E, Type-C USB, DJI Air Unit plug-and-play connector, BEC 5V@3A + 9V@2.5A, 5 UARTs (UART4 fixed for Bluetooth), input 3-6S LiPo, size 36.9x36.9mm, mounting 30.5x30.5mm (φ4mm hole, φ3mm with silicone dampers), weight 8.2g, firmware target GEPRCF722_BT_HD_V3, supported firmware Betaflight. Note: In its announcement of Feb 25, 2026 the manufacturer states that, due to a temporary hardware adjustment, the current production batch does not support Bluetooth wireless tuning; all other functions work normally.

Box contents

  • 1 x flight controller, 1 x DJI Air Unit adapter cable, 1 x FC adapter cable, 4 x nylon nuts, 4 x silicone grommets, 2 x SH1.0 4-pin silicone cable, 1 x camera connection cable
1. Open FC Manual in a New Tab
Click here to open the FC Manual in a new tab
2. Download FC Manual
Click here to download the FC Manual
FC: GEPRC GEP-F722-BT-HD V3 FLIGHT CONTROLLER Manual Connection Image
Open the Manual in a New Tab Manual Connection Image
    MCU:
    STM32F722
    IMU(Gyro):
    ICM42688-P (SPI)
    USB Port Type:
    Type-C
    Barometer:
    Supported
    OSD Chip :
    AT7456E
    BLE Bluetooth :
    Supported (UART4)
    DJI Air Unit Connection Way :
    DJI Air Unit plug-and-play connector
    6-pin DJI Air Unit Plug :
    Supported
    Flash(for BlackBox) :
    512MB
    BetaFlight Camera Control Pad :
    Not specified by manufacturer
    Power Input :
    3-6S LiPo
    5V Output :
    5V@3A
    9V Output :
    9V@2.5A
    3.3V Output :
    Not specified by manufacturer
    4.5V Output :
    Not specified by manufacturer
    ESC Signal Pads :
    Not specified by manufacturer
    UART :
    5 UARTs (UART4 fixed for Bluetooth)
    ESC Telemetry UART :
    Not specified by manufacturer
    LED Pad :
    Not specified by manufacturer
    Buzzer :
    Not specified by manufacturer
    BOOT Button :
    Not specified by manufacturer
    Supported Flight Controller Firmware :
    Betaflight
    Firmware Target Name :
    GEPRCF722_BT_HD_V3
    Mounting :
    30.5x30.5mm (φ4mm hole, φ3mm with silicone dampers)
    Dimension :
    36.9x36.9mm
    Weight:
    8.2g