TUR
GEPRC GEP-F405 HD FLIGHT CONTROLLER
- Power Input: 3-6S LiPo
- MCU: STM32F405
- Mounting: φ4mm hole, φ3mm with grommets (hole spacing not specified)
- BEC: 5V + 9V
- Blackbox: 16Mb
- Weight: Not specified by manufacturer
Detail
The GEPRC GEP-F405 HD FLIGHT CONTROLLER is a GEPRC flight controller. Specs: STM32F405 processor, MPU6000 (SPI) gyro, 16Mb Blackbox, barometer, OSD: AT7456E, Type-C USB, Direct plug-in for the DJI Digital FPV System, BEC 5V + 9V, 6 UARTs, input 3-6S LiPo, size 36x36mm, mounting φ4mm hole, φ3mm with grommets (hole spacing not specified), firmware target GEPRCF405, supported firmware Betaflight. BEC outputs are listed as 5V and 9V without current ratings. Supported receivers: Frsky XM/XM+/R-XSR, Futaba, DSM/DSMX, FlySky, TBS Crossfire, AC900 and most SBUS receivers.
Box contents
- 1 x GEP-F405-HD flight controller, 4 x M4-to-M3 silicone grommets, 1 x XT60 power cable, 1 x ESC cable
MCU:
STM32F405
IMU(Gyro):
MPU6000 (SPI)
USB Port Type:
Type-C
Barometer:
Supported (BMP280)
OSD Chip :
AT7456E
BLE Bluetooth :
Not specified by manufacturer
DJI Air Unit Connection Way :
Direct plug-in for the DJI Digital FPV System
6-pin DJI Air Unit Plug :
Supported
Flash(for BlackBox) :
16Mb
BetaFlight Camera Control Pad :
Not specified by manufacturer
Power Input :
3-6S LiPo
5V Output :
5V
9V Output :
9V
3.3V Output :
Not specified by manufacturer
4.5V Output :
Not specified by manufacturer
ESC Signal Pads :
Not specified by manufacturer
UART :
6 UARTs
ESC Telemetry UART :
Not specified by manufacturer
LED Pad :
Not specified by manufacturer
Buzzer :
Not specified by manufacturer
BOOT Button :
Not specified by manufacturer
Supported Flight Controller Firmware :
Betaflight
Firmware Target Name :
GEPRCF405
Mounting :
φ4mm hole, φ3mm with grommets (hole spacing not specified)
Dimension :
36x36mm
Weight:
