TUR
HGLRC H743 12S V1 42688 FC
- Power Input: 4S - 12S LiPo (12.4-50.4V)
- Mounting: 30.5x30.5mm (M3)
- Dimensions: 37.7x37.7mm
- Weight: 9.5g
- USB Port Type: Type-C
- MCU (Microcontroller Unit): STM32H743
Detail
The HGLRC H743 12S V1 is a 30.5x30.5mm flight controller designed for 5 to 15-inch frames, supporting a wide-range 4S-12S (12.4-50.4V) high-voltage input. It features a high-performance STM32H743 processor, ICM42688P gyro and a 16MB black box; the OSD supports analog and digital signals. It has fully modular plug-and-play connections using the Betaflight standard pinout. With support for up to 8 motor outputs (two 4in1 ESC connectors, M1-M4 / M5-M8) it is compatible with various frame types, and it supports seamless switching between dual analog camera inputs. It has 5V 2A and 10V 2A BEC outputs. Firmware: HGLRC_H743_PRO (version 2025.12.5). Weight is 9.5g; ~26g in total with cables. Package contents: FC and connection cables.
Box contents
1. Open FC Manual in a New Tab
Click here to open the FC Manual in a new tab2. Download FC Manual
Click here to download the FC Manual
MCU:
STM32H743
IMU(Gyro):
ICM42688P
USB Port Type:
Type-C
Barometer:
Not specified
OSD Chip :
Supported (analog and digital signal)
BLE Bluetooth :
Not specified
DJI Air Unit Connection Way :
Plug-and-play VTX connector (VIN, GND, TX1, RX1, GND, RX4, VTX)
6-pin DJI Air Unit Plug :
Supported
Flash(for BlackBox) :
16MB
BetaFlight Camera Control Pad :
Dual analog camera inputs (CAM1/CAM2, seamless switching)
Power Input :
4S-12S LiPo (12.4-50.4V)
5V Output :
5V 2A
9V Output :
10V 2A
3.3V Output :
Not specified
4.5V Output :
Not specified
ESC Signal Pads :
2x 4in1 ESC connectors (M1-M4 / M5-M8, 8 motors)
UART :
7 UARTs (UART1-5, 7, 8 per wiring diagram)
ESC Telemetry UART :
UART5 (RX5)
LED Pad :
Yes (LED)
Buzzer :
Yes (BB-)
BOOT Button :
Not specified
Supported Flight Controller Firmware :
Betaflight
Firmware Target Name :
HGLRC_H743_PRO (2025.12.5)
Mounting :
30.5x30.5mm, M3
Dimension :
37.7x37.7mm
Weight:
