GEPRC GEP-F722-BT-HD V2 FLIGHT CONTROLLER

Brand
Category: FC
Kod: MS46891340

  • Power Input: 3-6S LiPo
  • MCU: STM32F722RET6
  • Mounting: φ4mm hole, φ3mm with grommets (hole spacing not specified)
  • BEC: 5V@3A + 12V@3A
  • Blackbox: 512MB (dahili SD kart)
  • Weight: Not specified by manufacturer

Detail

The GEPRC GEP-F722-BT-HD V2 FLIGHT CONTROLLER is a GEPRC flight controller. Specs: STM32F722RET6 processor, ICM42688-P (SPI) gyro, 512MB (dahili SD kart) Blackbox, Bluetooth wireless tuning, OSD: AT7456E, Type-C USB, DJI Air Unit plug-and-play connector, BEC 5V@3A + 12V@3A, 5 UARTs, input 3-6S LiPo, size 36x36mm, mounting φ4mm hole, φ3mm with grommets (hole spacing not specified), firmware target GEPRCF722-BT-HD, supported firmware Betaflight.

Box contents

  • Not specified by manufacturer
1. Open FC Manual in a New Tab
Click here to open the FC Manual in a new tab
2. Download FC Manual
Click here to download the FC Manual
FC: GEPRC GEP-F722-BT-HD V2 FLIGHT CONTROLLER Manual Connection Image
Open the Manual in a New Tab Manual Connection Image
    MCU:
    STM32F722RET6
    IMU(Gyro):
    ICM42688-P (SPI)
    USB Port Type:
    Type-C
    Barometer:
    Not specified by manufacturer
    OSD Chip :
    AT7456E
    BLE Bluetooth :
    Supported
    DJI Air Unit Connection Way :
    DJI Air Unit plug-and-play connector
    6-pin DJI Air Unit Plug :
    Supported
    Flash(for BlackBox) :
    512MB (dahili SD kart)
    BetaFlight Camera Control Pad :
    Not specified by manufacturer
    Power Input :
    3-6S LiPo
    5V Output :
    5V@3A
    9V Output :
    12V@3A
    3.3V Output :
    Not specified by manufacturer
    4.5V Output :
    Not specified by manufacturer
    ESC Signal Pads :
    Not specified by manufacturer
    UART :
    5 UARTs
    ESC Telemetry UART :
    Not specified by manufacturer
    LED Pad :
    Not specified by manufacturer
    Buzzer :
    Not specified by manufacturer
    BOOT Button :
    Not specified by manufacturer
    Supported Flight Controller Firmware :
    Betaflight
    Firmware Target Name :
    GEPRCF722-BT-HD
    Mounting :
    φ4mm hole, φ3mm with grommets (hole spacing not specified)
    Dimension :
    36x36mm
    Weight:
    Not specified by manufacturer