TUR
GEPRC FETTEC G4 ALPHA FLIGHT CONTROLLER
- Power Input: Not specified by manufacturer
- MCU: STM32G473CEU6
- Mounting: Not specified by manufacturer
- BEC: 5V@2A (maks. 2.5A) + 9V@2A (maks. 2.5A)
- Blackbox: Not specified by manufacturer
- Weight: 6.6g
Detail
The GEPRC FETTEC G4 ALPHA FLIGHT CONTROLLER is a GEPRC flight controller. Specs: STM32G473CEU6 processor, llM 42602 (as written by the manufacturer) gyro, OSD: FETTEC OSD, Type-C USB, HD/analog 2-in-1 socket (DJI digital and analog), BEC 5V@2A (maks. 2.5A) + 9V@2A (maks. 2.5A), weight 6.6g, firmware target FETTEC ALPHA, supported firmware FETTEC Alpha. All FC connections use SH1.0 sockets; supports high-speed protocols such as S2M and DShot2400. Note: the manufacturer gives no size, mounting or input voltage.
Box contents
- Not specified by manufacturer
MCU:
STM32G473CEU6
IMU(Gyro):
llM 42602 (as written by the manufacturer)
USB Port Type:
Type-C
Barometer:
Not specified by manufacturer
OSD Chip :
FETTEC OSD
BLE Bluetooth :
Not specified by manufacturer
DJI Air Unit Connection Way :
HD/analog 2-in-1 socket (DJI digital and analog)
6-pin DJI Air Unit Plug :
Supported
Flash(for BlackBox) :
Not specified by manufacturer
BetaFlight Camera Control Pad :
Not specified by manufacturer
Power Input :
Not specified by manufacturer
5V Output :
5V@2A (maks. 2.5A)
9V Output :
9V@2A (maks. 2.5A)
3.3V Output :
Not specified by manufacturer
4.5V Output :
Not specified by manufacturer
ESC Signal Pads :
Not specified by manufacturer
UART :
Not specified by manufacturer
ESC Telemetry UART :
Not specified by manufacturer
LED Pad :
Yes (external LED)
Buzzer :
Yes (external buzzer)
BOOT Button :
Not specified by manufacturer
Supported Flight Controller Firmware :
FETTEC Alpha
Firmware Target Name :
FETTEC ALPHA
Mounting :
Not specified by manufacturer
Dimension :
Not specified by manufacturer
Weight:
