GEPRC TAKER H80_8S_BLS 80A 4IN1 ESC

Brand
Category: ESC
Kod: MS46891340

  • Power Input: 3-8S LiPo
  • Continuous Current: 80A
  • Burst Current: 85A (5 seconds)
  • Mounting: 30.5x30.5mm (φ4mm hole, φ3mm with silicone dampers)
  • Weight: 28.3g
  • Protocol: DShot150/300/600

Detail

The GEPRC TAKER H80_8S_BLS 80A 4IN1 ESC is a GEPRC 4in1 ESC. Specs: input 3-8S LiPo, 80A continuous, 85A (5 seconds) burst, DShot150/300/600, ammeter, firmware: BLHeli_S (B_X_30), size 56.3x61.1mm, mounting 30.5x30.5mm (φ4mm hole, φ3mm with silicone dampers), weight 28.3g.

Box contents

  • 1 x TAKER H80_8S_BLS 80A 4in1 ESC, 1 x filter board (dual 50V 2200uF), 1 x FC adapter cable (SH1.0 8pin 30mm), 1 x XT90 power cable (10AWG 230mm), 4 x silicone anti-shake pads (M3)
1. Open ESC Manual in a New Tab
Click here to open the ESC Manual in a new tab
2. Download ESC Manual
Click here to download the ESC Manual
ESC: GEPRC TAKER H80_8S_BLS 80A 4IN1 ESC Manual Connection Image
Open the Manual in a New Tab Manual Connection Image
    Firmware:
    BLHeli_S (B_X_30)
    PC Configurator Download Link :
    https://esc-configurator.com/
    Continuous Current :
    80A
    Burst Current :
    85A (5 seconds)
    TVS Protective diode :
    Not specified by manufacturer
    External Capacitor :
    Filter board included (dual 50V 2200uF)
    ESC Protocol :
    DShot150/300/600
    Power Input :
    3-8S LiPo
    Power Output :
    Not specified by manufacturer
    Current Sensor :
    Yes (ammeter)
    ESC Telemetry :
    No (BLHeli_S ESCs do not support telemetry)
    Mounting :
    30.5x30.5mm (φ4mm hole, φ3mm with silicone dampers)
    Dimension :
    56.3x61.1mm
    Weight :
    28.3g