TUR
GEPRC GEP-BL32 50A 96K 4IN1 ESC
- Power Input: 3-6S LiPo
- Continuous Current: 50A
- Burst Current: 55A (5 seconds)
- Mounting: 30.5x30.5mm
- Weight: 14g
- Protocol: DShot150/300/600
Detail
The GEPRC GEP-BL32 50A 96K 4IN1 ESC is a GEPRC 4in1 ESC. Specs: input 3-6S LiPo, 50A continuous, 55A (5 seconds) burst, DShot150/300/600, ammeter, telemetry, firmware: Target ST_G0_05 - 31.92; AM32 target AM32_ST_G0_05_G071_2.19, size 42.5x42.1mm, mounting 30.5x30.5mm, weight 14g. Note: GEPRC publishes a second ESC page with the same name (firmware target GEPRC_G071_4IN1_96K); it is listed as a separate product on our site.
Box contents
- 1 x GEP-BL32 50A 96K 4in1 ESC, 1 x electrolytic capacitor (50V 1000uF), 1 x FC adapter cable (SH1.0 8pin 30mm), 1 x XT60 power cable (12AWG 110mm), 8 x silicone anti-shake pads (M3)
1. Open ESC Manual in a New Tab
Click here to open the ESC Manual in a new tab2. Download ESC Manual
Click here to download the ESC Manual
Firmware:
Target ST_G0_05 - 31.92; AM32 target AM32_ST_G0_05_G071_2.19
PC Configurator Download Link :
Not specified by manufacturer
Continuous Current :
50A
Burst Current :
55A (5 seconds)
TVS Protective diode :
Not specified by manufacturer
External Capacitor :
50V 1000uF electrolytic capacitor included
ESC Protocol :
DShot150/300/600
Power Input :
3-6S LiPo
Power Output :
Not specified by manufacturer
Current Sensor :
Yes (ammeter)
ESC Telemetry :
Supported
Mounting :
30.5x30.5mm
Dimension :
42.5x42.1mm
Weight :
