TUR
RP3 V2 ExpressLRS 2.4ghz Nano Receiver
- Operating Voltage: DC 5V
- Weight: 4.6g (Including two antennas)
- Dimensions: 22mm*13mm*4mm
- Telemetry RF Power: Max 100mw
- Minimum receiver refresh rate: 25Hz
- Maximum reception refresh rate: 500Hz/F1000Hz
Detail
RadioMaster RP series receivers are equipped with a TCXO (temperature-compensated crystal oscillator) that guarantees reliable, stable, and accurate signal reception, providing superior performance in challenging environments and enhancing the flying experience.
The RadioMaster RP series receivers are designed with size, ease of use, and range in mind. Using the open-source firmware of ExpressLRS 2.4ghz, the RP series nano receivers deliver the features and range expected by today’s pilots.
Developed around the ESP8285 MCU and SX1280IMLTRT RF Chip, the RP series offers incredible range and low latency with Lora and FLRC 2.4ghz RF connections. With built-in WiFi, firmware updates can be made without removing the receiver from your craft. Binding can be performed using a binding expression, which means no fiddly plug connections or tedious button presses while trying to connect the battery.
The RP3 receiver has a Skyworks SE2431L that provides enhanced receiver performance, a PA that offers telemetry performance up to 100mW, and the ability to switch antennas for antenna diversity.
Box contents
Manual: RP3 V2 ExpressLRS 2.4ghz Nano Receiver
Open Manual in New Tab
