TUR
GEPRC ELRS NanoSE Receiver
- Operating voltage: 5V
- Weight: 0.4g
- Dimensions: 12.1mm*10.4mm
- Telemetry RF power: Not specified
- Minimum receiver refresh rate: 25Hz
- Maximum reception refresh rate: F500Hz
Detail
Summary
The GEPRC ELRS NanoSE receiver is a next-generation remote control system developed based on the ExpressLRS open-source project. ExpressLRS sets new standards for long-range connectivity, low latency, and a maximum refresh rate of 500 Hz.
The GEPRC ELRS NanoSE receiver operates at a 2.4 GHz frequency. Compared to the Nano receiver, the NanoSE receiver uses an integrated SMD ceramic antenna that further reduces its size while ensuring signal reception, making it more suitable for use in drones with limited space and weight.
Note: Currently, the shipped ELRS products have been pre-flashed with 2.x firmware. 2.x is not compatible with 1.x version, so you need to upgrade the transmitter to 2.x for proper frequency matching.
Box contents
Manual: GEPRC ELRS NanoSE Receiver
Open Manual in New Tab
Type :
Not specified
MCU :
ESP8285,SX1281
RF Chip :
Not specified
Telemetry RF power :
Not specified
Antenna :
Ceramic Antenna
Frequency Range :
2.4GHz ISM
Maximum receive refresh rate :
F500Hz
Minimum receiver refresh rate :
25Hz
Working voltage :
5V
Weight :
0.4
Dimension :
12.1mm*10.4mm
Firmware Version :
Not specified
FW Target :
Not specified
Bus interface :
