TUR
HOBBYWING RTF 80A 4in1 8S Lite AT
- Continuous Current: 80A x4
- Burst Current: 100A x4 (10 seconds)
- Input Voltage: 4-8S LiPo
- Mounting: 30.5mm hole spacing (hole diameter not specified)
- Dimensions: 56*57*7mm
- Weight: 39g
Detail
RTF 80A 4in1 8S Lite AT is a 4-in-1 FPV ESC manufactured by Hobbywing and reinforced with an F421 main controller and dual heatsink copper bars, providing 80A continuous / 100A (10 sec) burst current per channel. It is compatible with its own self-developed 32-bit firmware or AM32 firmware. It comes with gold-plated through-hole solder pads, vibration-damping rubber mounts, and an integrated TVS diode (for protection against sudden voltage spikes). There is no built-in BEC (according to the official manual PDF). The mounting hole spacing has been confirmed as 30.5mm according to the official manual diagram; the hole diameter (M3/M4) is not specified in the diagram. Note: While the official product page specifies the dimensions/weight as 56x57x7mm / 39g, the official manual PDF for the same product specifies 56.1x52x7mm / 41.3g; there is a small numerical difference between the two official sources.
