HGLRC ELRS T ONE TX Module

Detail

The HGLRC ELRS T ONE TX Module is a transmitter (TX) module based on ExpressLRS, an open source RC link project, operating in the 868~915MHz (FCC) band. Output power can be selected as 100mW / 250mW / 500mW / 1000mW / 2000mW; with a maximum of 2W it provides a stronger signal and a wide remote control range for ultra-long-distance flights. The refresh rate is 25Hz / 50Hz / 100Hz / 200Hz. Thanks to the cooling system consisting of a CNC metal heat sink running across the entire module and a turbofan, according to the manufacturer it runs stably for a long time without losing power under normal environmental conditions even at 2W. It has two replaceable bottom shells: JR standard 5-pin and NANO standard 8-pin, compatible with most remote control module bays on the market. To replace, simply remove 4 screws and plug in the 3-pin port. It has a high-contrast OLED display and an XT30 external power input port supporting up to 25.2V (DC 7.4V~25.2V, 2S~6S). Firmware: HGLRC OLED 900MHz TX, firmware version ELRS 3.4. Weight: 76±10g (NANO, without antenna), 85±10g (JR, without antenna). Dimensions: 41 x 85 x 29mm (NANO bottom shell, without antenna), 41 x 85 x 45.5mm (JR bottom shell, without antenna). The total boxed weight is 224g and the box size is 165 x 125 x 38mm. The MCU and RF chip used are not specified. Since there is no separate manual on the manufacturer's product page, the PDF file was created from the manufacturer's specification and dimension/weight images.

Box contents

• 1 x HGLRC 915 TX Module (NANO), 1 x JR compartment replacement bottom shell, 1 x JR bottom shell cable (assembled on the JR bottom shell), 1 x 915 TX Module antenna, 1 x hexagonal wrench, 1 x universal QR code instruction card, 1 x sticker