TUR
GEP-CT30 O3 Frame
- Flight control hole distance: 25.5x25.5mm
- Camera mount: 20mm
- Weight: 101.8g / 107.3g (COB LED)
- Wheelbase: 127mm
- Propeller: 3 inch
- Carbon plate: 3.0mm
Detail
The GEPRC GEP-CT30 O3 (Cinebot30 O3) is a 3-inch cinewhoop frame developed specifically for the DJI O3 Air Unit. The refined gimbal damping module fixes high-frequency vibration and jello, and several action cameras can be mounted. Its design combines engineering and aesthetics. Thanks to the quick-disassembly design, only 6 screws need to be removed to upgrade or replace parts. It is injection molded from high-toughness, impact-resistant PC+PET material. The camera bracket and frame columns are aviation-grade 7075-T aluminum. The main plate is 3.0mm, the bottom plate 1.5mm and the isolation plate 2.0mm.
Box contents
- 1 x main plate 3.0mm, 1 x bottom plate 1.5mm, 1 x isolation plate 2.0mm, 1 x set of screws, 1 x BEC module (optional), 1 x COB light strip (optional), 1 x set of 3D printed parts, 1 x 3-inch one-piece injection-molded prop guard, 1 x naked GP camera base mount, 2 x battery non-slip mats, 2 x 100mm receiver antenna tubes, 1 x M15*200 battery strap, 1 x M15*220 battery strap, naked GP camera power cables (4S and 6S balance), L-shaped screwdrivers
2.
Waiting
2.
Waiting
3.
Waiting
Carbon material :
Carbon fiber + PC/PET + 7075 aluminum
Wheelbase :
127mm
Top plate :
3.0mm (main plate)
Bottom plate :
1.5mm
Arm plate :
Not specified by manufacturer
Motor mounting holes:
12x12mm
VTX mounting holes:
20x20mm / 25.5x25.5mm
FC mounting holes :
25.5x25.5mm
Camera installation space :
20mm
Suitable propeller size :
3 inch
Dimension :
Not specified by manufacturer
Standard Version Weigh :
101.8g (without LED) / 107.3g (with COB LED)
Pro Version Weight :
