TUR
GEP-MK5X O3 Squashed X Frame
- Flight control hole distance: 30.5x30.5mm
- Camera mount: 20mm
- Weight: 141.9g (standard) / 156.1g (Pro)
- Wheelbase: 225mm
- Dimensions: 214mm x 168mm x 42mm
- Arm Plate: 5mm
Detail
The GEPRC GEP-MK5X O3 Squashed X Frame is a 5-inch freestyle frame with a squashed X layout (MARK5 O3 series). Building on the MARK5, the GEPRC team upgraded overall performance for the DJI O3 Air Unit. New 7075-T6 aluminum camera side plates are strong and durable and fully fit the DJI O3 camera (155° FOV, 4K 60FPS). TPU printed parts with an air-inlet cooling port were designed for the O3 VTX module. It has a separate capacitor and buzzer bay. Two 3D printed camera mounts take all GP action cameras, naked GP 8/10, Insta360 GO2 and Caddx Peanut. Coral orange and emerald green colors are available. The top and bottom plates are 2.5mm and the arms 5mm.
Box contents
- Standard edition: 1 x 2.0mm small top plate, 1 x 2.5mm large top plate, 1 x 2.5mm front bottom plate, 1 x 2.5mm rear bottom plate, 2 x 5.0mm front arms, 2 x 5.0mm rear arms, 1 x 5.0mm arm limit plate, 1 x 2.0mm front protection plate, 1 x camera aluminum part, 1 x set of screws; 3D printed parts (camera vibration-reduction mount, O3 VTX mount, VTX and TBS antenna mounts); 8 x M3x8 FC damping balls, 4 x 10x50mm motor hubs; battery straps, non-slip mats, EVA pads and double-sided tape
2.
Waiting
2.
Waiting
3.
Waiting
Carbon material :
Carbon fiber + 7075-T6 aluminum
Wheelbase :
225mm
Top plate :
2.5mm
Bottom plate :
2.5mm
Arm plate :
5mm
Motor mounting holes:
Not specified by manufacturer
VTX mounting holes:
Not specified by manufacturer
FC mounting holes :
30.5x30.5mm
Camera installation space :
20mm
Suitable propeller size :
5 inch
Dimension :
214mm x 168mm x 42mm
Standard Version Weigh :
141.9g
Pro Version Weight :
