GEP-DoMain4.2 Frame

Detail

The GEPRC GEP-DoMain4.2 Frame is a 4.2-inch cinematic / long range FPV frame with a DC (DeadCat) layout. Its distinctive structure improves stability. The new integrated side panel design can be personalized with decals. It supports full-size and naked GoPro mounts. Thanks to the DC structure, the propellers stay out of the shot for a clean image. The manufacturer pairs it with the M-10 GPS. The top plate is 2.0mm, the bottom plate 2.5mm and the arms 4.0mm thick. It has 20x20mm and 25.5x25.5mm flight controller, 9x9mm and 12x12mm motor, and 36x36mm and 28x28mm VTX mounting holes. Note: the manufacturer's spec table lists the FC holes as 20.5x20.5mm while its summary says 20x20mm.

Box contents

• 1 x 2.0mm top plate, 2 x 4.0mm front arms, 2 x 4.0mm rear arms, 1 x 4.0mm mid plate, 1 x 2.5mm bottom plate, 1 x 3.0mm mid plate, front/middle/tail aluminum components, 2 x side plates (black), screw pack, 3D printed parts (receiver and antenna holders, GoPro mount, arm pads, analog camera VR parts), motor sleeve tubes, 8 x FC damping balls, 4 x silicone pads, 1 x XT60EW 90-degree power cable, camera anti-slip pad, side plate stickers, DoMain instruction manual, 1 x 1.5mm L-shaped screwdriver