Tattu Classic 850mAh 3S1P 11.1V 75C (XT60) FPV LiPo Battery

Brand
Category: 3S (LiPo Battery)
Kod: MS46891340

  • Capacity: 850mAh
  • Configuration: 11.1V / 3S1P / 3 cells
  • Continuous Discharge Rate: 75C
  • Maximum Discharge Rate: 75C
  • Discharge Plug: XT60
  • Dimensions: 60mm x 30mm x 23mm

Detail

Tattu Classic 850mAh 3S1P 11.1V 75C FPV LiPo Battery (XT60) is a standard LiPo (non-HV) model from the Classic series and should be charged in standard LiPo charging mode. Advanced lamination stacking technology provides 27% lower internal resistance compared to wound cells; it features a ceramic separator, flame-retardant casing, and UN38.3 certification, with materials sourced from Japan and Korea. It provides 9.44Wh of energy and a cycle life of more than 500 cycles. The discharge connector is XT60 (14#, 45mm), and the balance connector is JST-XHR-4P (45mm). IMPORTANT: It should not be confused with the R-Line 5.0 850mAh 3S1P 11.1V 150C (id=33, XT30), which has the same capacity and cell count; this product belongs to the Classic series, is rated at 75C, and uses an XT60 connector (60x30x23mm, 82g). It is the smaller-capacity sibling of the Classic 1050mAh (id=61) and 1300mAh (id=60) 3S 75C models.

Box contents

1.

Waiting

2.

Waiting

3.

Waiting

    Brand :
    TATTU
    Capacity :
    850mAh
    Configuration :
    11.1V / 3S1P / 3 cells
    Continuous Discharge Rate :
    75C
    Max Discharge Rate :
    75C
    Dimensions :
    L*W*H=60mm x 30mm x 23mm
    Weight :
    (± 10g): 82g
    Power :
    Energy: 9.44Wh
    Charge Plug :
    JST-XHR-4P
    Discharge Plug :
    XT60