HGLRC 3.3G 5W VTX

Detail

The HGLRC 3.3G 5W VTX is a 5W high-power analog video transmitter operating in the 3.3GHz band, designed for long range and ultra-long range flights. It offers 64 channels (8 bands x 8 channels) in the 3060-3500MHz range; therefore it is used with a receiver/goggles that support the 3.3GHz band. Power is adjustable in PIT/300mW/1W/3W/5W levels. The CNC-machined one-piece upper/lower shell and cooling fan provide strong heat dissipation. It has two function buttons and LED indicators: holding the channel button for 1 second cycles through CH1-8, holding the power button for 1 second cycles through 300mW/1W/3W/5W; holding the power button for more than 2 seconds enters or exits PIT mode. It can be adjusted via OSD with the IRC Tramp protocol. It has a 2-8S (DC 7-36V) wide voltage input. Connections: VID, RX, GND, BAT; antenna output is SMA. Signal-to-noise ratio (Fo±3MHz) >55dBc, antenna port impedance 50 Ohms, input signal NTSC or PAL, operating temperature -10°C to +60°C. Mounting is 20x20mm M2. Size is 48.5 x 35 x 21.5mm, weight 52g, 83g in total including the package. Note: HGLRC's spec sheet image states 64x37x18mm and 25mW/1W/3W/5W; since the product text, the dimensioned product image and the button descriptions state 48.5x35x21.5mm and PIT/300mW/1W/3W/5W, these are used. The manufacturer states that local regulations must be followed and the antenna must be installed before use.

Box contents

• 1 x 3.3G 5W video transmitter, 1 x SMA 100mm adapter, 1 x GH1.25 6 pin 100mm single-ended cable, 1 x SH1.0 4 pin to GH1.25 6 pin 60mm double-ended cable