GEP-CL35 V2 Frame

Detail

The GEPRC GEP-CL35 V2 (Cinelog35 V2) is a 3.5-inch cinewhoop frame developed from the CL35 and can carry the DJI O3 VTX. The bottom-mounted damping camera gimbal solves the camera IMU resonance issue for good anti-shake performance. The prop guard designed for the O3 Air Unit gives easy access to the memory card and USB port. The battery is held by a strap fixed with 7075 aluminum parts. The power cable uses an XT60E1-M plug integrated with the carbon plate. The injection-molded prop guard is impact resistant, and the frame-to-plate connection is reinforced with aluminum columns. The prop guard inner diameter is 95mm. Note: the manufacturer's spec table lists the arm/main plate as 3.5mm, while the package list says the main carbon plate is 3.0mm.

Box contents

• Carbon plates: 1 x main carbon plate 3.0mm, 1 x top plate 2.0mm, 1 x bottom plate 1.5mm; screw kit (battery strap aluminum holders, 7075 aluminum columns, screws and nuts); 3D printed parts (2-hole and 4-hole camera mounts, receiver mount, T-shaped antenna mount, VTX antenna mount, capacitor mount, power plug parts, GP camera base); injection-molded prop guard; FC and camera damping rubbers; XT60E1-M power plug with cable, motor hubs and 5.8G VTX extension cable