TUR
GEP-MARK4 HD5 DJI FPV Freestyle Frame kits
- Flight control hole distance: 30.5x30.5mm / 20x20mm
- Camera mount: DJI FPV Air Unit
- Weight: 121g
- Wheelbase: 224mm
- Dimensions: 138mm x 176mm
- Arm Plate: 5mm
Detail
The GEPRC GEP-MARK4 HD5 is an H-type 5-inch freestyle frame that perfectly fits the DJI FPV Air Unit. 3D printed parts fix and protect the Air Unit, and no props are in view. It is a super-lightweight frame made entirely of 3K carbon fiber. The arms allow quick maintenance and replacement. 25mm standoffs give better height and CG, and ALU6061 standoffs add hardness. It has 30.5x30.5mm and 20x20mm flight controller holes, and the stack can sit in the center or rear. The arms are 5mm, the side, top and bottom plates 2.5mm, and the protect plate 2mm. The manufacturer recommends 2205-2306.5 motors, 30A-50A ESCs and a 4S 1500mAh - 6S 1300mAh battery.
Box contents
- 4 x 5mm 5-inch arms, 2 x 2.5mm side plates, 1 x 2.5mm top plate, 1 x 2.5mm bottom plate, 2 x 2mm bumper plates, 2 x 2mm reinforce plates, 1 x LiPo silicone pad, 1 x DJI FPV Air Unit fixing, 1 x antenna mount, 1 x RX antenna mount
2.
Waiting
2.
Waiting
3.
Waiting
Carbon material :
3K carbon fiber
Wheelbase :
224mm
Top plate :
2.5mm
Bottom plate :
2.5mm
Arm plate :
5mm
Motor mounting holes:
Not specified by manufacturer
VTX mounting holes:
Not specified by manufacturer
FC mounting holes :
30.5x30.5mm / 20x20mm
Camera installation space :
DJI FPV Air Unit
Suitable propeller size :
5 inch
Dimension :
138mm x 176mm
Standard Version Weigh :
121g
Pro Version Weight :
