Electronics Black Wrist Watch
Electronics Black Wrist Watch
Electronics Black Wrist Watch
Electronics Black Wrist Watch
Electronics Black Wrist Watch
Electronics Black Wrist Watch
Product Thumb
Product Thumb
Product Thumb
Product Thumb
Product Thumb
Product Thumb

HOBBYWING RTF 65A 4in1 6S Lite AT

Brand
Category: ESC (Electronic Speed Controller)
Kod: MS46891340
(Review Pending)
  • Continuous Current: 65A x4
  • Burst Current: 80A x4
  • Input Voltage: 4-6S LiPo
  • Mounting: 30.5*30.5/Φ3mm
  • Dimensions: 44*42*5.86mm
  • Weight: 15g

Detail

RTF 65A 4in1 6S Lite AT is a 4-in-1 FPV ESC manufactured by Hobbywing with an F421 main controller and high-quality MOSFETs, providing 65A continuous / 80A burst current per channel. It is compatible with its own self-developed 32-bit firmware or AM32 firmware. It offers gold-plated through-hole solder pads, vibration-damping rubber mounts, and support for bidirectional DShot with RPM filtering. Note: While the official product page specifies the dimensions/weight as 44x42x5.86mm / 15g, the official combined manual PDF for the same product specifies 44x42x5.5mm / 15.4g and the mounting hole diameter as M3; the small differences are due to inconsistencies between the two official sources.

Box contents

1. Open ESC Manual in a New Tab
Click here to open the ESC Manual in a new tab
2. Download ESC Manual
Click here to download the ESC Manual
    Firmware:
    Self-developed 32-bit ESC firmware (also compatible with AM32 firmware)
    PC Configurator Download Link :
    Not specified (BLHeliSuite is third-party configuration software, and an official download link is not provided on this product page)
    Continuous Current :
    65A (per channel)
    Burst Current :
    80A (per channel, duration not specified in the official source)
    TVS Protective diode :
    Not specified
    External Capacitor :
    High-frequency, low-ESR capacitor included in the package (according to the official manual: 35V 680μF x1)
    ESC Protocol :
    PWM, DShot300/600 (bidirectional DShot supported)
    Power Input :
    4-6S LiPo
    Power Output :
    Not specified (motor output voltage/current depends on the input voltage; no separate value is provided)
    Current Sensor :
    Available — scale 117 (1/10 mV/A), offset 0 (according to the official combined manual)
    ESC Telemetry :
    Not specified (no separate telemetry UART/pad information is provided)
    Mounting :
    30.5 x 30.5 mm (M3 hole diameter — according to the official manual)
    Dimension :
    44 x 42 x 5.86 mm (according to the official product page; official manual specifies 44x42x5.5mm)
    Weight :
    15 g (according to the official product page; official manual specifies 15.4g)