Tattu Classic 300mAh 2S1P 7.6V HV 75C FPV LiPo Battery

Brand
Category: 2S (LiPo Battery)
Kod: MS46891340

  • Capacity: 300mAh
  • Configuration: 7.6V / 2S1P / 2 cells (LiHV)
  • Continuous Discharge Rate: 75C
  • Maximum Discharge Rate: 75C
  • Discharge Plug: JST-PHR
  • Dimensions: 47mm x 17mm x 13mm

Detail

Tattu Classic 300mAh 2S1P 7.6V HV 75C FPV LiPo Battery is a high-voltage (HV/LiHV) pack from the Classic series; the 2S pack provides a nominal voltage of 7.6V instead of 7.4V and must be charged using an HV-compatible charger. It provides 2.28Wh of energy and a cycle life of more than 500 cycles. IMPORTANT: The discharge connector is JST-PHR (22#, 20mm); it is not directly compatible with drones using XT30/XT60/BT3.0 inputs. The balance connector is JST-XHR (10mm). It should not be confused with the Classic 300mAh 2S1P 7.6V HV 95C (id=56), which has the same capacity, cell count, and voltage; that model is 95C with a BT3.0 connector and measures 65x10x13mm, while this product is 75C with a JST-PHR connector and measures 47x17x13mm (both weigh 17g).

Box contents

1.

Waiting

2.

Waiting

3.

Waiting

    Brand :
    TATTU
    Capacity :
    300mAh
    Configuration :
    7.6V / 2S1P / 2 cells
    Continuous Discharge Rate :
    75C
    Max Discharge Rate :
    75C
    Dimensions :
    L*W*H=47mm x 17mm x 13mm
    Weight :
    (± 10g): 17g
    Power :
    Energy: 2.28Wh
    Charge Plug :
    JST-XHR-3P
    Discharge Plug :
    JST-PHR